Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010
Priority mail: fast and cheap - Express Courier: fast and safe
Before returning products, please contact us
KITs with some home automation controller, modules and devices, to easily start a domotic system using our DomBus modules.
DomBus modules are designed for reliability and very low power consumption. They are available with two firmwares:
Modules and devices that should be applicable to electric cars, vans, trucks, bikes, ...
EV chargers, Type-2 cables, EV charging cable, EVSE modules, contactors, Type-B RCD RCCB, home automation systems integrating electric car charging, ...
If you know about electrical systems and home automation system, you can build a wallbox by yourself using:
More information to build a wallbox at https://www.creasol.it/EVSE
Home automation system / IoT controllers:
Single board computers like Raspberry PI and Rock PI S, equipped with Linux + Domoticz, ESP8266
DomBus modules (optimized low-power modules that works with Domoticz and other home automation systems)
ESP8266/ESP32 modules
Input and output modules for home automation systems , domotica and IoT. Relay board, SSR, pushbutton inputs, temperature sensors, dimmer, ...
Power supply modules, AC/DC, DC/DC, switching mode power supply, linear regulator, battery charger/controller.
Contactors, relays, and circuit breaker, including Type-B residual current detectors for electric car chargers
Wireless devices for domotics: 433MHz, 868MHz, Sub-1GHz, LTE, WiFi, Bluetooth, Zigbee, ZWave, 2.4GHz, 5GHz, ....
Domotic sensors, for temperature, humidity, pressure, gas, pollution, ....
DomBus modules integrating a temperature sensor and relative humidity (works with Domoticz and other home automation systems), NTC 10k temperature sensors, DS18B20 1-wire sensors, ...
USB cable, 1m long, with switch.
Type-A male USB connector on one side, Type-C male USB connector on the other side.
Suitable for Raspberry PI 4 , modern smartphones and other devices.
Compact power supply with EU plug, 5V 3000mA, optimal for Raspberry PI 4 and for fast battery charging.
Output voltage: 5V
Output current: 3A.
EU plug.
No USB cable.
Ultrasonic distance sensor for arduino, domoticz, raspberry pi, Creasol DomBus1.
Waterproof sensor with 2.5m cable connected to the electronic board, that transmits a pulse which duration is proportional with the distance between sensor and reflecting surface.
Can be used to measure level of water or other liquid inside a tank, for example.
Can be easily interface with Raspberry + Domoticz using Creasol DomBus1 as interface.
Weather station that measure temperature, humidity, pressure, wind speed and direction and rain. Supply with a nice palm that shows all values.
Palm can be connected to Raspberry by a USB cable, so it's possible to get and accumulate all measures on Domoticz. Instructions to perform raspberry and domoticz configuration is available at https://www.creasol.it/support/domotics-home-automation-and-diy/128-usb-weather-station-connected-to-raspberry-pi-and-domoticz
1-wire digital temperature sensor, in TO-92 package, manufactured by Dallas/Maxim-IC
+/- 0.5K accuracy, 9-12bit resolution.
Suitable for Domoticz/RaspberryPI and ESP8266 controllers
Compact switching mode power supply, voltage regulator.
Output current: 2A.
Vin: from 0.85 to 12Vdc.
Vout: from 1.5 to 33Vdc, regulated by trimming the potentiometer knob.
Drop-out voltage: 1.5V.
Size: 18x10x4mm
Switching mode power supply, voltage regulator.
Output current: 2A.
Vin: from 3 to 35Vdc.
Vout: from 1.5 to 33Vdc,regulated by trimming the potentiometer knob.
Drop-out voltage: 1.5V.
With 3 digits display showing the input and output voltage.
Size: 61x34x12mm
Switching mode power supply, voltage regulator.
Output current: 2A.
Vin: from 3 to 35Vdc.
Vout: from 1.5 to 33Vdc, regulated by trimming the potentiometer knob.
Drop-out voltage: 1.5V.
Size: 48x23x14mm
Italiano
English
Deutsch
Français
Español
Português
Dutch
Danish
Norwegian
Swedish
Finnish
Czech
Hungarian
Latvian
Lithuanian
Polish
Romanian
Slovak
