Plná podpora: väčšina produktov je navrhnutá nami!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Objednávky sú odoslané do 1 pracovného dňa

Prioritná pošta: rýchlo a lacno - Expresný kuriér: r

Záruka 24 mesiacov, jednoduché vrátenie/vrátenie peňazí

Pred vrátením produktov nás kontaktujte!

Štartér Domoticz KIT1 - Malina + DomBus1 + DomBusTH

Štartér Domoticz KIT1 - Malina + DomBus1 + DomBusTH

0 Review(s) 

Štartovacia sada pre váš systém domácej automatizácie!

Obsah:

  • 1x Malina PI4
  • 1 x microSD s vysokou výdržou 32 GB už naprogramované pomocou Raspbian + Domoticz + Firewall + zálohovanie
  • 1x adaptér RS485 na USB
  • 1x Creasol DomBus1 (2 reléové výstupy, 6 vstupov, 1 vstup AC)
  • 1x Creasol DomBusTH (snímač teploty a relatívnej vlhkosti, biele + červené + zelené LED diódy, 4 vstupy, 2 výstupy, 1 analógový vstup)

OEM
domKit1
Sorry, This item is out of stock.
128,00 €
S DPH
Množstvo
Vypredané

  Plná podpora: väčšina produktov je navrhnutá nami!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Objednávky sú odoslané do 1 pracovného dňa

Prioritná pošta: rýchlo a lacno - Expresný kuriér: r

  Záruka 24 mesiacov, jednoduché vrátenie/vrátenie peňazí

Pred vrátením produktov nás kontaktujte!

Štartovacia sada pre váš systém domácej automatizácie!

Obsah:

  • 1 malina PI4
  • 1 vysokokapacitná microSD karta s veľkosťou 32 GB, ktorá je už programovaná v systéme Raspbian + Domoticz + Firewall + zálohovanie
  • 1 adaptér RS485 na USB
  • 1 Creasol DomBus1 (2 reléové výstupy, 6 vstupov, 1 vstup AC)
  • 1x Creasol DomBusTH (snímač teploty a relatívnej vlhkosti, biele + červené + zelené LED diódy, 4 vstupy, 2 výstupy, 1 analógový vstup)

Domoticz je veľmi jednoduchý a výkonný radič pre domotické systémy, prístupné pomocou webového prehliadača a aplikácie pre Android / iOS.

Raspberry je jednodeskový mini počítač s nízkym výkonom (menej ako 10 W), so štvorjadrovým procesorom ARM, vhodný pre domácu automatizáciu.

DomBus1 je zariadenie, ktoré je možné umiestniť do rozvodnej skrinky na stenu na ovládanie svetiel, čerpadiel, ventilov a na čítanie vstupov, ako sú magnetické senzory dverí / okien / slepých okien (pre alarm), PIR (pre alarm a prítomnosť), tlačidlo zvončeka, .... Je pripojený k ovládaču Raspberry tenkým káblom do 4 vodičov (pre alarm alebo lepšie pre RS485): 2 vodiče pre dáta (RS485 pri 115 200 bps, ktoré umožňujú pokrytie až 1 km), 2 vodiče pre napájanie 12V napájanie (lepšie, ak je batéria zálohovaná)

DomBusTHje malá doska, ktorú je možné položiť na prázdny kryt a je určená na meranie teploty a relatívnej vlhkosti. Má tiež 3 LED diódy, biela + červená + zelená, ktoré je možné aktivovať na upozornenie na stav alebo v prípade výpadku napájania (napríklad v prípade núdze)lampa). Nakoniec má 4 konfigurovateľné I / O (ktoré je možné pripojiť k prepínačom a tlačidlám, alarmovým senzorom, bzučiaku, ...) a 2 výstupy s otvoreným kolektorom (vhodné na riadenie externých 12V relé).

Riešenie RS485 umožňuje:

  1. vyhnúť sa RF znečisteniu (spôsobenému WiFi a inými bezdrôtovými systémami)
  2. pomocou tenkého kábla prepojte všetky zariadenia cez zbernicu
  3. napájajte všetky zariadenia batériovým záložným zdrojom 12V, takže systém domácej automatizácie bude fungovať aj v prípade výpadku napájania

Tento systém je tiež optimalizovaný pre nízku spotrebu energie:

  1. Malina spotrebuje menej ako 10 wattov
  2. DomBus1 spotrebuje 0,050 W v pohotovostnom režime a 0,3 W, keď sú všetky 2 relé ZAPNUTÉ . Pre porovnanie, Sonoff Dual R2 spotrebuje v pohotovostnom režime 1,2 W a viac ako 2 W iba so zapnutými 2 relé.
  3. DomBusTH spotrebuje 0,03 W

a je skutočne plug & play : stačí pripojiť nové zariadenie DomBus k zbernici a toto zariadenie nájdete na paneli spínačov Domoticz: zmeňte jeho hardvérovú adresu z panela prepínača tak, aby priradila jedinečnú adresu, a všetky vstupy / výstupy / snímače budú automaticky dostupné v Domoticz automaticky .

Čo môžete robiť s Domoticz?

  • Ovládajte vnútorné a vonkajšie osvetlenie
  • Vytvorte spoľahlivý a plnohodnotný výstražný systém, ktorý zobrazuje stav telefónu (Telegramaplikácie) a posielať obrázky / videá v prípade akýchkoľvek udalostí, ktoré chcete.
  • Keď niekto zazvoní, pošlite obrázok na smartphone
  • Ovládajte bránu a bránu pre chodcov, aby ste ich otvorili na diaľku
  • Zmerajte izbovú teplotu a relatívnu vlhkosť
  • Ovládajte tepelné čerpadlo alebo iný ohrievač / chladič: nie je potrebný termostat v každej miestnosti, iba neviditeľný tepelný senzor v každej miestnosti
  • Počas zimy aktivuje elektrické ohrievače, ak solárna fotovoltaika vyrobí viac energie ako spotrebuje
  • Ak sú nainštalované tepelné čerpadlo a solárne fotovoltaické čerpadlo, optimalizujte spotrebu energie reguláciou tepelného čerpadla na dostupnú energiu zo solárneho FV systému.
  • Ak je nainštalovaný ventilačný systém, reguluje ho tak, že reguluje vlhkosť v miestnostiach a aktivuje odvlhčovač vzduchu (a chladiacu špirálu, ak je k dispozícii) v lete, keď je k dispozícii solárna energia.
  • Aktivujte externé zariadenia, ako sú odvlhčovače vzduchu, elektrické ohrievače, keď je z fotovoltaiky viac energie alebo keď vlhkosť / teplota v miestnosti nie je dobrá.
  • Skontrolujte hladinu nádrže na dažďovú vodu a ovládajte ventil / čerpadlo na polievanie záhrady
  • Pripojte sa k meteo stanici a získajte údaje o daždi, vetre, teplote, vlhkosti, tlaku v pekných grafoch

Voliteľné dostupné produkty

  • Oficiálne puzdro Raspberry PI4, červeno / biele, vyrobené vo Veľkej Británii
  • 5V 3A adaptér, na napájanie Raspberry
  • Kábel USB typu C na pripojenie 5V adaptéra k Raspberry (potrebné na pripojenieadaptér 5V 3A na Raspberry
  • Jeden z dostupných 2A spínacích redukčných regulátorov na zníženie 13,8 V (napätie batérie) na 5 V, na napájanie Raspberry: vhodné, keď sa na napájanie systému domácej automatizácie používa batéria 12V s nabíjačkou / dodávateľom.
  • viac zariadení DomBus na správu väčšieho množstva vstupov, výstupov a senzorov
  • Modul DomESP1 + ESP8266, keď potrebujete ovládať zariadenia / senzory pomocou WiFi pripojenia (pohotovostný výkon: 0,5 W)
  • Kábel pre RS485, 2x0,50 + 2x0,22, 100m
  • Kábel pre alarm, 4x0,22, 100m

dombus connectionhttp://www.creasol.it/images/stories/creDomBus1_domoticz_main_window.jpgAN domoticz example1

Viac informácií

Odkaz na server Creasol DomBus1

Odkaz na niektoré skriptypre Domoticz

Youtube video, ktoré zobrazuje Domoticz pre domácnosťyoutube video

Potrebujete pomoc? pripojiť sa kKanál DomBus na telegrame!




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

OEM
domKit1

Reviews

Write your review

Štartér Domoticz KIT1 - Malina + DomBus1 + DomBusTH

Štartovacia sada pre váš systém domácej automatizácie!

Obsah:

  • 1x Malina PI4
  • 1 x microSD s vysokou výdržou 32 GB už naprogramované pomocou Raspbian + Domoticz + Firewall + zálohovanie
  • 1x adaptér RS485 na USB
  • 1x Creasol DomBus1 (2 reléové výstupy, 6 vstupov, 1 vstup AC)
  • 1x Creasol DomBusTH (snímač teploty a relatívnej vlhkosti, biele + červené + zelené LED diódy, 4 vstupy, 2 výstupy, 1 analógový vstup)

Write your review

Mohlo by vás zaujať aj

Zákazníci, ktorí kúpili tento produkt, kúpili tiež:

Štartér Domoticz KIT1 -...

128,00 €