Visiškas palaikymas: daugumą produktų sukūrėme mes!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Užsakymai išsiunčiami per 1 darbo dieną

Prioritetinis paštas: greitas ir pigus - Greitasis kurj

24 mėnesių garantija, lengvas grąžinimas / grąžinimas

Prieš grąžindami prekes susisiekite su mumis!

„Domoticz“ starterio rinkinys1 - avietė + „DomBus1“ + „DomBusTH“

„Domoticz“ starterio rinkinys1 - avietė + „DomBus1“ + „DomBusTH“

0 Review(s) 

Pradinis rinkinys jūsų namų automatikos sistemai!

Turinys:

  • 1x aviečių PI4
  • 1x 32 GB patvarus „microSD“ jau užprogramuotas naudojant „Raspbian + Domoticz + Firewall + Backup“
  • 1x RS485-USB adapteris
  • 1x „Creasol DomBus1“ (2 relės išėjimai, 6 įėjimai, 1 kintamosios srovės įėjimas)
  • 1x „Creasol DomBusTH“ (temperatūros + santykinės drėgmės jutiklis, baltos + raudonos + žalios lemputės, 4 įėjimai, 2 išėjimai, 1 analoginė įvestis)

OEM
domKit1
Sorry, This item is out of stock.
128,00 €
Su mokesčiais
Kiekis
Išparduota

  Visiškas palaikymas: daugumą produktų sukūrėme mes!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Užsakymai išsiunčiami per 1 darbo dieną

Prioritetinis paštas: greitas ir pigus - Greitasis kurj

  24 mėnesių garantija, lengvas grąžinimas / grąžinimas

Prieš grąžindami prekes susisiekite su mumis!

Pradinis rinkinys jūsų namų automatikos sistemai!

Turinys:

  • 1 aviečių PI4
  • 1 32 GB patvarus „microSD“ jau užprogramuotas naudojant „Raspbian + Domoticz + Firewall + Backup“
  • 1 RS485-USB adapteris
  • 1 „Creasol DomBus1“ (2 relės išėjimai, 6 įėjimai, 1 kintamosios srovės įėjimas)
  • 1x „Creasol DomBusTH“ (temperatūros + santykinės drėgmės jutiklis, baltos + raudonos + žalios lemputės, 4 įėjimai, 2 išėjimai, 1 analoginė įvestis)

„Domoticz“ yra labai lengvas ir galingas domotinių sistemų valdiklis, prieinama žiniatinklio naršykle ir „Android / iOS“ programoje.

„Raspberry“ yra vienos plokštės mini kompiuteris, mažos galios (mažiau nei 10 vatų), su keturių branduolių ARM procesoriumi, tinkamas namų automatizavimui.

„DomBus1“ yra prietaisas, kurį galima įdėti į sieninę jungiamąją dėžę, kad būtų galima valdyti žibintus, siurblius, vožtuvus ir skaityti įvestis, pvz., Durų / langų / žaliuzių magnetinius jutiklius (aliarmui), PIR (aliarmui ir buvimui), durų varpo mygtuką, .... Jis sujungtas su „Raspberry“ valdikliu plonu laidu per 4 laidus (skirtas signalizacijai, arba geriau RS485): 2 laidai duomenims (RS485 115200bps, leidžiantis įveikti iki 1km), 2 laidai 12V maitinimui tiekimas (geriau, jei akumuliatorius bus papildytas)

„DomBusTH“yra maža lenta, kurią galima uždėti ant tuščio dangčio ir skirta matuoti temperatūrą ir santykinę drėgmę. Be to, jis turi 3 šviesos diodus, baltus + raudonus + žalius, kuriuos galima įjungti pranešant apie būseną arba nutrūkus elektros tiekimui (pvz., Avariniam atvejui)lempa). Galiausiai, jis turi 4 konfigūruojamas įvesties / išvesties jungtis (kurias galima prijungti prie jungiklių ir mygtukų, aliarmo jutiklių, garsinio signalo ...) ir 2 atvirojo kolektoriaus išvestis (tinka valdyti išorines 12 V reles).

RS485 sprendimas leidžia:

  1. išvengti radijo dažnių taršos (kurią sukelia „WiFi“ ir kitos belaidės sistemos)
  2. naudokite ploną laidą, kad sujungtumėte visus įrenginius per magistralę
  3. tiekti visus prietaisus iš 12 V maitinimo šaltinio, todėl namų automatikos sistema veiks net ir nutrūkus

Be to, ši sistema yra optimizuota mažoms energijos sąnaudoms:

  1. Avietė sunaudoja mažiau nei 10 vatų
  2. „DomBus1“ budėjimo režimu sunaudoja 0,050 W, o įjungus visas 2 reles - 0,3 W. Norint palyginti, „Sonoff Dual R2“ budėjimo režimu sunaudoja 1,2 W, o įjungus tik 2 reles - daugiau nei 2 W.
  3. „DomBusTH“ sunaudoja 0,03 W

ir tikrai yra „plug & play“ : tiesiog prijunkite naują „DomBus“ įrenginį prie magistralės ir „Domoticz“ jungiklių skydelyje galite rasti tą įrenginį: pakeiskite jo aparatūros adresą iš jungiklio skydelio, kad priskirtumėte unikalų adresą, o visi įėjimai / išėjimai / jutikliai bus automatiškai pasiekiama „Domoticz“ .

Ką galite padaryti su „Domoticz“?

  • Valdykite vidaus ir lauko žibintus
  • Sukurkite patikimą ir visavertę aliarmo sistemą, rodančią telefono būseną (Telegramprograma) ir siųskite nuotraukas / vaizdo įrašus bet kokio norimo įvykio atveju.
  • Išsiųskite nuotrauką išmaniajame telefone, kai kas nors paskambins
  • Valdykite vartus ir pėsčiųjų vartus, kad juos atidarytumėte nuotoliniu būdu
  • Išmatuokite kambario temperatūrą ir santykinę drėgmę
  • Valdykite šilumos siurblį ar kitą šildytuvą / aušintuvą: nereikia termostato kiekviename kambaryje, bet tiesiog nematomas šilumos jutiklis kiekviename kambaryje
  • Žiemą įjungia elektrinius šildytuvus, jei saulės fotoelektros gamina daugiau energijos nei naudojimo
  • Jei yra sumontuotas šilumos siurblys ir saulės fotovoltinė energija, optimizuokite energijos suvartojimą, reguliuodami šilumos siurblį pagal turimą saulės PV energiją
  • Jei įrengta vėdinimo sistema, ji reguliuoja patalpų drėgmės kontrolę ir oro sausintuvo (ir aušinimo ritės, jei yra) įjungimą vasarą, kai yra saulės energija.
  • Suaktyvinkite išorinius prietaisus, tokius kaip oro sausintuvai, elektriniai šildytuvai, kai fotoelektros energija yra papildoma arba kai kambario drėgmė / temperatūra nėra gera.
  • Patikrinkite lietaus vandens rezervuaro lygį ir valdykite vožtuvą / siurblį, kad laistytumėte sodą
  • Prisijunkite prie meteo stoties ir gražiais grafikais paimkite lietaus, vėjo, temperatūros, drėgmės, slėgio duomenis

Galimi pasirinktiniai produktai

  • Aviečių PI4 oficialus dėklas, raudonas / baltas, pagamintas JK
  • 5V 3A adapteris, skirtas avietėms tiekti
  • C tipo USB kabelis, skirtas 5V adapteriui prijungti prie „Raspberry“ (reikalingas prijungti5V 3A adapteris avietei
  • Vienas iš galimų 2A perjungimo reguliatorių, leidžiantis sumažinti 13,8 V (akumuliatoriaus įtampą) iki 5 V, tiekiant avietę: tinka, kai namų automatikos sistemai tiekti naudojama 12 V baterija su akumuliatoriaus įkrovikliu / tiekėju.
  • daugiau „DomBus“ įrenginių, kad būtų galima valdyti daugiau įėjimų, išėjimų ir jutiklių
  • „DomESP1 + ESP8266“ modulis, kai reikia valdyti įrenginius / jutiklius per „WiFi“ jungtį (budėjimo režimu galia: 0,5 W)
  • Kabelis skirtas RS485, 2x0,50 + 2x0,22, 100m
  • Kabelis signalizacijai, 4x0,22, 100m

dombus connectionhttp://www.creasol.it/images/stories/creDomBus1_domoticz_main_window.jpgAN domoticz example1

Daugiau informacijos

Nuoroda į „Creasol DomBus“

Nuoroda į kai kuriuos scenarijuspasižymėjo Domoticz

„Youtube“ vaizdo įrašas, kuriame rodomas „Domoticz“ namamsyoutube video

Reikia pagalbos? Prisijungti prie„DomBus“ kanalas „Telegram“!




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

OEM
domKit1

Reviews

Write your review

„Domoticz“ starterio rinkinys1 - avietė + „DomBus1“ + „DomBusTH“

Pradinis rinkinys jūsų namų automatikos sistemai!

Turinys:

  • 1x aviečių PI4
  • 1x 32 GB patvarus „microSD“ jau užprogramuotas naudojant „Raspbian + Domoticz + Firewall + Backup“
  • 1x RS485-USB adapteris
  • 1x „Creasol DomBus1“ (2 relės išėjimai, 6 įėjimai, 1 kintamosios srovės įėjimas)
  • 1x „Creasol DomBusTH“ (temperatūros + santykinės drėgmės jutiklis, baltos + raudonos + žalios lemputės, 4 įėjimai, 2 išėjimai, 1 analoginė įvestis)

Write your review

Jums taip pat gali patikti

Klientai, kurie pirko šią prekę taip pat pirko:

„Domoticz“ starterio...

128,00 €