Pilns atbalsts: lielāko daļu produktu izstrādājam mēs!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Pasūtījumi tiek nosūtīti 1 darba dienas laikā

Prioritārais pasts: ātri un lēti - Express kurjer

24 mēnešu garantija, ērta atgriešana/atmaksa

Pirms preču atgriešanas sazinieties ar mums!

Domoticz starteris KIT1 - Aveņu + DomBus1 + DomBusTH

Domoticz starteris KIT1 - Aveņu + DomBus1 + DomBusTH

0 Review(s) 

Sākuma komplekts jūsu mājas automatizācijas sistēmai!

Saturs:

  • 1x Aveņu PI4
  • 1x 32 GB augstas izturības microSD jau ir ieprogrammēts ar Raspbian + Domoticz + Firewall + Backup
  • 1x RS485-USB adapteris
  • 1x Creasol DomBus1 (2 releja izejas, 6 ieejas, 1 maiņstrāvas ieeja)
  • 1x Creasol DomBusTH (temperatūras + relatīvā mitruma sensors, baltas + sarkanas + zaļas gaismas diodes, 4 ieejas, 2 izejas, 1 analogā ieeja)

OEM
domKit1
Sorry, This item is out of stock.
128,00 €
AR PVN
Daudzums
Nav noliktavā

  Pilns atbalsts: lielāko daļu produktu izstrādājam mēs!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Pasūtījumi tiek nosūtīti 1 darba dienas laikā

Prioritārais pasts: ātri un lēti - Express kurjer

  24 mēnešu garantija, ērta atgriešana/atmaksa

Pirms preču atgriešanas sazinieties ar mums!

Sākuma komplekts jūsu mājas automatizācijas sistēmai!

Saturs:

  • 1 Aveņu PI4
  • 1 32 GB augstas izturības microSD jau ir ieprogrammēts ar Raspbian + Domoticz + Firewall + Backup
  • 1 RS485-USB adapteris
  • 1 Creasol DomBus1 (2 releja izejas, 6 ieejas, 1 maiņstrāvas ieeja)
  • 1x Creasol DomBusTH (temperatūras + relatīvā mitruma sensors, baltas + sarkanas + zaļas gaismas diodes, 4 ieejas, 2 izejas, 1 analogā ieeja)

Domoticz ir ļoti vienkāršs un spēcīgs domotisko sistēmu kontrolieris, kas pieejams, izmantojot tīmekļa pārlūku un android / iOS lietotni.

Raspberry ir viena dēļa mini dators, mazjaudas (mazāk nekā 10 vatu), ar četrkodolu ARM procesoru, piemērots mājas automatizācijai.

DomBus1 ir ierīce, kuru var ievietot sienas sadales kārbā, lai kontrolētu gaismas, sūkņus, vārstus un nolasītu ieejas, piemēram, durvju / logu / žalūziju magnētiskos sensorus (trauksmei), PIR (trauksmei un klātbūtnei), durvju zvana pogu, .... Tas ir savienots ar Raspberry kontrolieri ar plānu vadu 4 vadu iekšienē (trauksmei vai labāk RS485): 2 vadi datiem (RS485 ar ātrumu 115200bps, kas ļauj pārvarēt līdz 1 km), 2 vadi 12 V strāvai piegāde (labāk, ja akumulators tiek papildināts)

DomBusTHir maza plāksne, kuru var novietot uz tukša vāka un kas paredzēta temperatūras un relatīvā mitruma mērīšanai. Tam ir arī 3 gaismas diodes, baltas + sarkanas + zaļas, kuras var aktivizēt, lai paziņotu par statusu vai strāvas padeves pārtraukuma gadījumā (piemēram, avārijas gadījumā)lampa). Visbeidzot, tam ir 4 konfigurējami I / O (kurus var savienot ar slēdžiem un spiedpogām, trauksmes sensoriem, skaņas signālu ...) un 2 atvērta kolektora izejas (piemērotas ārējo 12 V releju vadīšanai).

RS485 risinājums ļauj:

  1. izvairīties no RF piesārņojuma (ko izraisa WiFi un citas bezvadu sistēmas)
  2. izmantojiet plānu kabeli, lai savienotu visas ierīces, izmantojot autobusu
  3. piegādājiet visas ierīces ar 12 V barošanas avota akumulatoru, tāpēc mājas automatizācijas sistēma darbosies pat elektroenerģijas padeves pārtraukuma gadījumā

Arī šī sistēma ir optimizēta zemam enerģijas patēriņam:

  1. Aveņu patēriņš ir mazāks par 10 vatiem
  2. DomBus1 patērē 0,050 W gaidstāves režīmā un 0,3 W, kad visi 2 releji ir ieslēgti . Lai salīdzinātu, Sonoff Dual R2 patērē 1,2 W gaidstāves režīmā un vairāk nekā 2 W, ieslēdzot tikai 2 relejus.
  3. DomBusTH patērē 0.03W

un ir patiešām plug & play : vienkārši pievienojiet jaunu DomBus ierīci kopnei, un Domoticz Switches panelī varat atrast šo ierīci: mainiet tās aparatūras adresi no slēdžu paneļa, lai piešķirtu unikālu adresi, un visas ieejas / izejas / sensori būs automātiski pieejams Domoticz automātiski .

Ko jūs varat darīt ar Domoticz?

  • Vadīt iekštelpu un āra apgaismojumu
  • Izveidojiet uzticamu un pilnvērtīgu trauksmes sistēmu, kas tālrunī rāda statusu (Telegrammalietotne) un nosūtiet attēlus / videoklipus jebkura vēlama notikuma gadījumā.
  • Nosūtiet attēlu viedtālrunī, kad kāds zvana
  • Vadiet vārtus un gājēju vārtus, lai tos atvērtu attālināti
  • Izmēra istabas temperatūru un relatīvo mitrumu
  • Vadiet siltumsūkni vai citu sildītāju / dzesētāju: nav nepieciešams termostats katrā telpā, bet tikai neredzams siltuma sensors katrā telpā
  • Ziemas laikā aktivizē elektriskos sildītājus, ja saules fotoelektriskā enerģija rada vairāk enerģijas nekā lietošanas jauda
  • Ja ir uzstādīts siltumsūknis un saules fotoelektriskais elements, optimizējiet enerģijas patēriņu, regulējot siltumsūkni uz pieejamo saules enerģijas PV
  • Ja ir uzstādīta ventilācijas sistēma, to regulē, kontrolējot telpu mitrumu un aktivizējot gaisa sausinātāju (un dzesēšanas spoli, ja tāda ir) vasarā, kad ir pieejama saules enerģija
  • Aktivizējiet ārējās ierīces, piemēram, gaisa sausinātājus, elektriskos sildītājus, ja fotoelektriskā enerģija ir papildu jauda vai ja telpas mitrums / temperatūra nav laba.
  • Pārbaudiet lietus ūdens tvertnes līmeni un kontrolējiet vārstu / sūkni dārza laistīšanai
  • Izveidojiet savienojumu ar meteo staciju un paņemiet lietus, vēja, temperatūras, mitruma, spiediena datus glītos grafikos

Pieejami produkti pēc izvēles

  • Aveņu PI4 oficiāla lieta, sarkana / balta, izgatavota Lielbritānijā
  • 5V 3A adapteris Aveņu piegādei
  • C tipa USB kabelis 5V adaptera pievienošanai Raspberry (nepieciešams, lai izveidotu savienojumu5V 3A adapteris Raspberry
  • Viens no pieejamajiem 2A pārslēgšanas pazemināšanas regulatoriem, lai samazinātu 13,8 V (akumulatora spriegumu) līdz 5 V, lai piegādātu Aveņu: piemērots, ja mājas automatizācijas sistēmas piegādei izmanto 12 V akumulatoru ar akumulatora lādētāju / piegādātāju.
  • vairāk DomBus ierīču, lai pārvaldītu vairāk ieeju, izeju un sensoru
  • DomESP1 + ESP8266 modulis, kad jums jāpārvalda ierīces / sensori, izmantojot WiFi savienojumu (gaidīšanas režīma jauda: 0,5 W)
  • Kabelis RS485, 2x0,50 + 2x0,22, 100m
  • Kabelis trauksmei, 4x0,22, 100m

dombus connectionhttp://www.creasol.it/images/stories/creDomBus1_domoticz_main_window.jpgAN domoticz example1

Vairāk informācijas

Saite uz Creasol DomBus

Saite uz dažiem skriptiemDomoticam

Youtube video, kurā redzams Domoticz mājāmyoutube video

Vajadzīga palīdzība? pievienotiesDomBus kanāls telegrammā!




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

OEM
domKit1

Reviews

Write your review

Domoticz starteris KIT1 - Aveņu + DomBus1 + DomBusTH

Sākuma komplekts jūsu mājas automatizācijas sistēmai!

Saturs:

  • 1x Aveņu PI4
  • 1x 32 GB augstas izturības microSD jau ir ieprogrammēts ar Raspbian + Domoticz + Firewall + Backup
  • 1x RS485-USB adapteris
  • 1x Creasol DomBus1 (2 releja izejas, 6 ieejas, 1 maiņstrāvas ieeja)
  • 1x Creasol DomBusTH (temperatūras + relatīvā mitruma sensors, baltas + sarkanas + zaļas gaismas diodes, 4 ieejas, 2 izejas, 1 analogā ieeja)

Write your review

Jums arī varētu patikt

Klienti, kuri iegādājās šo preci nopirka arī:

Domoticz starteris KIT1 -...

128,00 €