Volle Unterstützung: Die meisten Produkte werden von uns entworfen!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Bestellungen werden innerhalb eines Werktages versandt

Priority Mail: schnell und günstig – Exp

24 Monate Garantie, einfache Rückgabe/Rückerstattung

Kontaktieren Sie uns, bevor Sie Produkte zur

Zweiachsiger Solartracker-Controller

Zweiachsiger Solartracker-Controller

1 Review(s) 

2-Achsen-Sonnentracker-Controller in flachem DIN-Schienengehäuse, funktioniert im Stand-alone-Modus und auch mit Heimautomatisierungssystemen wie Domoticz, HomeAssistant, NodeRED, Modbus, ...

credombustracker
Protocol: Modbus RTU (compatible with almost any system)
107,36 €
75,15 € - 30%
Bruttopreis Versand innerhalb von 1 Werktag
Menge
Erhältlich

  Volle Unterstützung: Die meisten Produkte werden von uns entworfen!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Bestellungen werden innerhalb eines Werktages versandt

Priority Mail: schnell und günstig – Exp

  24 Monate Garantie, einfache Rückgabe/Rückerstattung

Kontaktieren Sie uns, bevor Sie Produkte zur

Hausautomationsmodul, das verwendet werden kann als Standalone-Tracker, autonom arbeitend.

Kann auch über ein Hausautomationssystem gesteuert werden, wie Domotik (DomBusTracker-Version mit DomBus-Protokoll-Firmware), Home Assistant, Node-RED, OpenHAB, ... (DomBusTracker-Version mit Modbus-Protokoll-Firmware).

Zweiachsiger Solartracker

Sonnentracker ist sehr gut für Photovoltaikanlagen, weil steigert die Gesamtproduktionsenergie und außerdem steigert die Leistungsfähigkeit am frühen Morgen und am späten Nachmittag, wenn Energie teurer und weniger verfügbar ist.

Das folgende Diagramm zeigt den Vergleich der an einem sonnigen Tag am 31. Oktober 2024 in Norditalien zwischen einem zweiachsigen Solartracker und einer Photovoltaikanlage auf dem Dach erzeugten Energie.

Comparison between energy produced by a 2-axis tracker and fixed photovoltaic on the roof

Vergleicht man die beiden Systeme, kann man sagen, dass unter diesen Bedingungen der 2-Achsen-Tracker fast dreimal so viel leistet wie eine Photovoltaikanlage auf dem Dach. Normalerweise leistet er fast doppelt so viel wie eine Photovoltaikanlage auf einem nach Süden ausgerichteten Dach mit normaler Neigung.für italienische Häuser (um die 15 Grad).

Dieser Controller basiert auf dem chinesischen XMYC-3 Controller und verwendet den gleichen Sonnensensor, bietet aber zusätzlich einige Funktionen wie den automatische Erkennung der Endschalter im Motor (Linearantriebe haben im Inneren Endschalter, die die Stromzufuhr unterbrechen), Integration von Hausautomationssystemen (Sie können zwischen dem proprietären DomBus-Protokoll, das mit Domoticz funktioniert, und dem Modbus-Standardprotokoll wählen, das mit fast jedem Domotic-Controller funktioniert) und automatische Rückkehr in die Nachtposition.

Merkmale

  • Verwenden Sie ein Standardmäßige wasserdichte Sonnensensoren Hergestellt durch 4 Photodetektoren, um die beste Neigung/den besten Azimut auch bei Wolken zu bestimmen./li>
  • 4x 10A Relais ermöglichen die Steuerung 2 Linearantriebe mit 800kg Kraft (oder ähnlich), versorgt durch ein 24V- (bevorzugt) oder 12V-Netzteil.
  • Strommessung zur automatischen Erkennung der internen Endschalter des Linearantriebs.
  • Zusätzliche 6 analoge/digitale Eingänge, die an NTC, Energiezähler, Windgeschwindigkeitsmesser usw. angeschlossen werden können.
  • 2x 10A Zusatzrelais, zum Aktivieren/Deaktivieren des Netzteils (Energiesparen in der Nacht) und mehr.
  • 1x optoisolierter AC-Eingang zum Erkennen (und Melden) von Stromausfällen
  • Interner RS485-Bus-Abschlusswiderstand (150 Ohm), der durch einen PCB-Jumper (mit einem Lötkolben) aktiviert werden kann
  • RS485-Bus, der mit bis zu 500 m Kabel funktioniert (mit Standard-Alarmkabel: 2x0,50+2x0,22mm² + Schirm)/li>
  • Flaches DIN-Schienengehäuse, 115 x 90 x 40 mm
  • Steckbarer Klemmenblock für einfache Verdrahtung
  • Über den RS485-Bus konfigurierbare Parameter, um mit fast jedem Tracking-System zu funktionieren
  • Verfügbar mit 2 Firmwares Ihrer Wahl:
    • DomBus-Firmware, in Zusammenarbeit mit Domoticz, Implementierung des proprietären DomBus-Protokolls
    • Modbus-Firmware, funktioniert mit NodeRED, Home Assistant, OpenHAB und vielen anderen Controllern, die das Standard-Modbus-Protokoll unterstützen.
  • Sehr geringer Stromverbrauch: 15 mW mit ausgeschalteten Relais.
  • Geliefert mit 2 Leistungswiderständen 5W zur Strommessung (zur Erkennung der internen Endschalter des Motors), 2 Varistoren 33V zur Vermeidung von Überspannungen an den Motorspulen und einem 27-Ohm-Widerstand zur Versorgung des Sonnensensors

Sonnensensor, Aktoren, 24V Netzteil und Absicherung müssen separat erworben werden.

Anschlussschema

Connection diagram for 2-axis solar tracker and DomBusTracker controller

Ausführliche Informationen und Anwendungshinweise unter https://www.creasol.it/DomBusTracker




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

credombustracker

Reviews

Grade 
Fabio Brazza

Funziona molto bene

Lo uso per controllare un inseguitore a due assi con due motori elettrici a pistone.
Funziona bene anche quando il cielo è coperto, e dopo il tramonto ritorna sempre in posizione. 10+

Write your review

Zweiachsiger Solartracker-Controller

2-Achsen-Sonnentracker-Controller in flachem DIN-Schienengehäuse, funktioniert im Stand-alone-Modus und auch mit Heimautomatisierungssystemen wie Domoticz, HomeAssistant, NodeRED, Modbus, ...

Write your review

Vielleicht gefällt Ihnen auch

Zweiachsiger...

107,36 € 75,15 €