

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010
Priority Mail: schnell und günstig – Exp
Kontaktieren Sie uns, bevor Sie Produkte zur
Plug & Play Hausautomations-KIT, komplett mit vorinstallierter Software und Netzteil, mit 3 Domotikmodule: DomBus31 (8 Relaisausgänge), DomBus12 (9 Ein-/Ausgänge), DomBusTH (Temperatur- und Feuchtigkeitssensor, rote/grüne/weiße LEDs, 6 Ein-/Ausgänge) und DomRelay2 (2 Relaismodule)
Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010
Priority Mail: schnell und günstig – Exp
Kontaktieren Sie uns, bevor Sie Produkte zur
Gebrauchsfertiges KIT für Hausautomationssystem Dazu gehören der Rock PI S Single-Board-Computer ARM 64bit, ein Metallgehäuse, eine langlebige 32 GB-Speicherkarte mit Debian Linux, Domoticz, eine Firewall und ein Backup-System.
Es enthält außerdem 3 DomBus-Module für 8 Relaisausgänge, 1 Temperatur- und relative Luftfeuchtigkeitssensor, rote, grüne und weiße LEDs, 4 Open-Drain-Ausgänge (die zur Ansteuerung externer Relais oder externer LEDs genutzt werden können, aber auch als Eingänge konfiguriert werden können), 11 vollständig konfigurierbare Ein-/Ausgänge (anschließbar an Drucktaster, Doppeltaster, Analogeingänge, 10 NTC-Temperatursensoren, Zähler und Messgeräte, ...), 2 Relaismodul, 1 USB/RS485-Adapter zum Anschluss von DomBus-Modulen an den Rock PI S, 2 Netzteile (5V für Rock PI S Controller, 12V für DomBus-Netzwerk)
Dies ist ein Starterkit, Plug-and-Play, das den einfachen Aufbau eines Domotiksystems ermöglicht und die Überwachung des Gebäudeverbrauchs mit übersichtlichen Diagrammen und Vergleichsfunktionen auf wöchentlicher, monatlicher und jährlicher Basis ermöglicht.
Bei Anschluss an die Stromversorgung und das LAN ist eine Verbindung zu seiner IP-Adresse (automatisch vom DHCP-Dienst zugewiesen) über Folgendes möglich:
Rock PI S ist eine kleinere und günstigere Alternative für die (oft nicht verfügbaren) Himbeer PI 4 Einplatinencomputer mit weniger RAM, dafür aber kompakter Formfaktor und sehr geringer Stromverbrauch, ideale Lösung für optimierte Software wie Domoticz (geschrieben in C++).
Die Bereitstellung sollte erfolgen durch:
Die microSD enthält bereits Hausautomationssystem Domoticz: Dies ist eine kostenlose Open-Source-Software, die in C++ geschrieben ist und selbst auf dieser kleinen Hardware perfekt funktioniert.
Domoticz ermöglicht die Verwaltung verschiedener Hardwaretypen, wie ZigBee, ZWaveund viele andere drahtlose und kabelgebundene Protokolle. Außerdem Creasol DomBus Das Protokoll wird unterstützt, so dass es möglich ist, über einen RS485-USB-Adapter eine Verbindung herzustellen. Viele Module (zum analoge/digitale Eingänge, analoge/digitale Ausgänge, Relaisausgänge, Sensoren, LEDs, Lichtmanagement, EVSE zur Verwaltung des Ladens von Elektrofahrzeugen, ...).
Mithilfe der Domoticz- und DomBus-Module ist Folgendes möglich:
Viele Hardware-Plugins können automatisch installiert und aktualisiert werden. Außerdem stehen viele Skriptsprachen zur Verfügung, um Erstellen Sie einfache und komplexe Automatisierungen, wie Lua Und Python. Sehr einfache Automatisierungen können mit einer grafischen Sprache namens Blockig.
RK3308 hat zwei IO-Spannungen, 1,8 V/3,3 V. Für ROCK Pi S beträgt der SpannungspegelDie in den obigen Tabellen gezeigten GPIOs sind 3,3 V und die Toleranz gegenüber diesen sind 3,63 V.
Rockchip RK3308 GPIO hat 5 Bänke, GPIO0 bis GPIO4, jede Bank hat 32 Pins, die Benennung ist wie folgt:
GPIO0_A0 ~ A7 GPIO0_B0 ~ B7 GPIO0_C0 ~ C7 GPIO0_D0 ~ D7 GPIO1_A0 ~ A7 .... GPIO1_D0 ~ D7
Für den Rockchip 4.4-Kernel kann die GPIO-Nummer wie folgt berechnet werden. Nehmen wir GPIO4_D3 (PIN8 auf 26-PIN-GPIO) als Beispiel:
GPIO4_D3 = 32*4 + 8*3 + 3 = 155
So legen Sie den GPIO4_D3-Ausgang fest
cd /sys/class/gpio echo 155 > export cd gpio155 echo out > direction echo 1 > value # Ausgabe hoch echo 0 > value # Ausgabe niedrig
The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.
The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.
Our industrial and home automation modules are designed to be
Modules are available in two version:
Store website - Information website
For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram
Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.
Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.
Includes:
Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:
Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).
Versatile module designed to control gate or garage door.
DIN rail low profile module, with 8 relays and very low power consumption:
Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.
Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.
Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.
DIN rail module, low profile, with 12 relays outputs and very low power consumption.
Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.
DIN rail module designed for burglar alarm system.
DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.
Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs
IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller