Full support: molti prodotti sono stati progettati da noi!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Gli ordini vengono spediti entro 1 giorno lavorativo

Posta prioritaria: veloce ed economica - Corriere Espresso: veloce e sicuro

24 mesi di garanzia, reso/rimborso facile

Contattaci prima di restituire i prodotti!

Kit domotico Plug&Play completo di alimentatore e moduli I/O

KIT domotico Rock PI S + misuratore potenza/energia + DomBus31 + DomBus12 + DomBusTH + DomRelay2

0 Commento(s) 

KIT domotico Plug & Play, completo di software preinstallato e alimentatore, con 3 moduli domotici: DomBus31 (8 uscite relè), DomBus12 (9 ingressi/uscite), DomBusTH (sensore temperatura+umidità, LED rosso/verde/bianco, 6 ingressi/uscite) e DomRelay2 (modulo 2 relè)

OEM
domkitpis3
160,00 €
Tasse incluse Spedizione in 1 giorno lavorativo
Quantità
Ultimi articoli in magazzino

  Full support: molti prodotti sono stati progettati da noi!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Gli ordini vengono spediti entro 1 giorno lavorativo

Posta prioritaria: veloce ed economica - Corriere Espresso: veloce e sicuro

  24 mesi di garanzia, reso/rimborso facile

Contattaci prima di restituire i prodotti!

KIT pronto all'uso per impianto domotico che include il computer monoscheda Rock PI S ARM a 64 bit, involucro in metallo, scheda di memoria ad alta resistenza da 32 GB con Debian Linux, Domoticz, firewall e sistema di backup.

Include anche 3 moduli DomBus per ottenere 8 uscite relè, 1 sensore di temperatura e umidità relativa, LED rossi verdi e bianchi, 4 uscite open-drain (che può essere utilizzato per controllare relè esterni o LED esterni, ma può anche essere configurato come ingressi), 11 ingressi/uscite completamente configurabili (che può essere collegato a pulsanti, pulsanti doppi, ingressi analogici, 10 sensori di temperatura NTC, contatori e misuratori, ...), Modulo 2 relè, 1 adattatore USB/RS485 per collegare i moduli DomBus al Rock PI S, 2 alimentatori (5V per il controller Rock PI S, 12V per la rete DomBus)

Questo è un kit di avvio, plug and play, che consente di realizzare facilmente un sistema domotico e di iniziare a monitorare i consumi dell'edificio con grafici chiari e di confrontare le funzioni su base settimanale, mensile e annuale.

Una volta connesso all'alimentazione e alla LAN, è possibile connettersi al suo indirizzo IP (assegnato automaticamente dal servizio DHCP) tramite:

  • browser www, su PC e smartphone, all'indirizzo https://192.168.1.101 oppure http://192.168.1.101:8080 (sostituire 192.168.1.101 con il suo indirizzo IP reale)/li>
  • smartphone unopp Domotica
  • Consolle SSH

Rock PI S è un'alternativa più piccola ed economica per il (spesso non disponibile) Raspberry PI 4 computer a scheda singola, con meno RAM ma con un fattore di forma compatto e un consumo energetico molto basso, soluzione ideale per software ottimizzati come Domoticz (scritto in C++).

Domotic system using Rock PI 2 and DomBus modules

Contenuto del KIT:

  • Computer a scheda singola Rock PI S con involucro metallico, microSD da 32 GB con software già installato e pronto all'uso
  • 1x Creasol DomBus31 modulo din-rail, con 8 uscite relè: 6x relè SPST 5A 250V (solo uscita NO) + 2 uscite SPDT 10A 250V (con uscite sia NO che NC)
  • 1x Creasol DomBus12 modulo compatto con 2 uscite open-drain (che possono essere collegate a relè esterni come DomRelay2 e che possono essere configurate come ingresso, se necessario) e 7 ingressi/uscite completamente configurabili/li>
  • 1x Creasol DomBusTH scheda, all'interno di un sensore di temperatura + umidità relativa, LED rosso verde e bianco, 4 ingressi completamente configurabili e 2 uscite open-drain (che possono essere collegate a relè esterni come DomRelay2, o configurate come ingressi)
  • 1x Creasolo DRelè om2 modulo con 2 relè SPST 5A collegabili alle uscite open-drain dei moduli DomBusTH e DomBus12
  • 1x alimentatore din-rail con uscita 13,6 V
  • 1x convertitore DC/DC per alimentare il computer Rock PI S
  • 1x adattatore RS485/USB per collegare il modulo DomBus al Rock PI S

Caratteristiche del Rock PI S

  • MCU quad-core, 1,3 GHz, 64 bit
  • 512 MB di RAM
  • 32 GB di spazio di archiviazione
  • Molto compatto: 50x50x30mm
  • Consumo energetico molto basso: 0,4 W normalmente, fino a 1,5 W durante i lavori più pesanti
  • 1 USB + 1 ethernet 100Mbps + 1 USB tipo-C per alimentazione
  • Diversi GPIO disponibili: vedere sotto per sapere come utilizzarli
  • Domoticz già installato, con gestore dei plugin Python e plugin Creasol DomBus
  • Sistema di backup automatico, che consente di esportare il backup su un NAS o altro storage
  • Firewall, che permette di limitare l'accesso al dispositivo impedendo accessi non autorizzati
  • Il sistema operativo è ottimizzato per limitare l'accesso in scrittura alla micro-sd, prolungandone la durata

Dovrebbe essere fornito da:

  • Adattatore di alimentazione USB Type-C, 5 V 1 A
  • o regolatore DC/DC USB Type-C, la soluzione ideale quando è disponibile una batteria di backup da 12 V

Domotica

La microSD include già Sistema domotico Domoticz: si tratta di un software open source gratuito scritto in C++, che funziona perfettamente anche su hardware di queste dimensioni.

Domoticz consente di gestire diversi tipi di hardware, come ZigBee, ZWavee molti altri protocolli wireless e cablati. Inoltre, Creasol DomBus è supportato il protocollo, quindi è possibile collegare tramite un adattatore RS485-USB, molti moduli (ad ingressi analogici/digitali, uscite analogiche/digitali, uscite relè, sensori, LED, gestione luci, EVSE per gestire la ricarica dei veicoli elettrici, ...).

Utilizzando i moduli Domoticz e DomBus è possibile:

  • monitorare e controllare l'energia/potenza dell'edificio, prevenendo le disconnessioni per sovraccarico
  • monitorare la temperatura e l'umidità
  • migliorare il consumo energetico dell'impianto HVAC (riscaldamento, ventilazione e aria condizionata) per utilizzare al massimo l'energia da fonti rinnovabili (fotovoltaico)
  • automatizzare il giardino e l'orto-irrigazione del giardino
  • inviare una foto allo smartphone quando qualcuno suona il campanello
  • gestire le luci dell'edificio
  • caricare uno o più veicoli elettrici in modo intelligente, in base al livello della batteria del veicolo (SoC), utilizzando piena potenza, o utilizzando solo extraenergia da fotovoltaico
  • gestire il sensore di allarme per ottenere un sistema di allarme antifurto a piena funzionalità, controllabile dallo smartphone
  • Inviare brevi video sullo smartphone quando si attiva un sensore di allarme (ad esempio per il monitoraggio esterno)
  • e molto altro ancora

Molti plugin hardware possono essere installati e aggiornati automaticamente. Inoltre, sono disponibili molti linguaggi di scripting per creare automazioni semplici e complesse, Piace Lua E Pitone. Automazioni molto semplici possono essere create utilizzando un linguaggio grafico, denominato A blocchi.


Utilizzo dei GPIO

GPIO connectors for Rock PI S V1.3

  • I pin contrassegnati in arancione sono progettati per la console di debug predefinita.
  • PWM: x2, PWM2/PWM3
  • SPI: x2, SPI1, SPI2
  • I2C: x3, I2C0/I2C1/I2C3
  • UART: x4, UART0/UART1/UART2/UART3
  • ADC: x1, ADC_IN0. La tensione di ingresso massima è 1,8 V.
  • Quando si utilizza I2C3, è necessario selezionare solo uno dei due gruppi, PIN#11/13 sull'intestazione 1 a 26 pin e PIN#13/14 sull'intestazione 2 a 26 pin.

Tensione IO

RK3308 ha due tensioni IO, 1,8 V/3,3 VPer ROCK Pi S, il livello di tensionel dei GPIO mostrati nelle tabelle sopra sono 3,3 V e la tolleranza di quelli sono 3,63 V.

Numero GPIO

Il GPIO Rockchip RK3308 ha 5 banchi, da GPIO0 a GPIO4, ogni banco ha 32 pin, denominati come di seguito:

   GPIO0_A0 ~ A7 GPIO0_B0 ~ B7 GPIO0_C0 ~ C7 GPIO0_D0 ~ D7 GPIO1_A0 ~ A7 .... GPIO1_D0 ~ D7

Per il kernel Rockchip 4.4, il numero GPIO può essere calcolato come di seguito, prendendo GPIO4_D3 (PIN8 su GPIO a 26 PIN) come esempio:

   GPIO4_D3 = 32*4 + 8*3 + 3 = 155

Per impostare l'uscita GPIO4_D3

   cd /sys/class/gpio echo 155 > export cd gpio155 echo out > direction echo 1 > value # output alto echo 0 > value # output basso





Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

OEM
domkitpis3

Opinioni

Scrivi la tua opinione

KIT domotico Rock PI S + misuratore potenza/energia + DomBus31 + DomBus12 + DomBusTH + DomRelay2

KIT domotico Plug & Play, completo di software preinstallato e alimentatore, con 3 moduli domotici: DomBus31 (8 uscite relè), DomBus12 (9 ingressi/uscite), DomBusTH (sensore temperatura+umidità, LED rosso/verde/bianco, 6 ingressi/uscite) e DomRelay2 (modulo 2 relè)

Scrivi la tua opinione

Potrebbe anche piacerti

KIT domotico Rock PI S +...

160,00 €