Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010
Priority mail: fast and cheap - Express Courier: fast and safe
Before returning products, please contact us
Domotic modules for home automation systems, designed for Domoticz and Home Assistant
Universal receivers, multi-frequency, with 1 or more channels, that can be used with almost any remote control in the market that transmit at 433.92, 868.3 and other frequencies between 288 and 418 MHz, fixed and rolling code.
A special receiver, UniLock, can be used to activate an electric lock or electric strike plate: very easy to be connected, it's suitable for the main door and pedestrian gate. In this way you can open your main door or pedestrian gate using your existing remote control.
Hand-held remote control duplicators, single frequency or multifrequency, with nice design and good performances.
Also, stationary remote control duplicators / transmitters, which work in more than 1 frequency (for example button 1 at 433.92MHz, and button 2 at 868.3 MHz ); supplied externally ( from 7 to 35Vdc, or from 5 to 24Vac ) or internally (by a CR2032 long-life cell ).
Strong and long life antennas for receivers and other devices.
Antennas are supplied with 3m RG58 coax cable, stainless steel wall bracket and screws, removable whip and hole for water drain.
Optionally it's possible to supply antennas with SMA male or female connector.
Cells and batteries, mainly used on remote controls. Alkaline and lithium type.
Repair service for remote controls and car keys.
Ability to repair your own remote control or car key at a predetermined price.
Very rarely remote controls or car keys cannot be repaired: in this case you will be charged the only shipping cost to return back the device: you should pay nothing if the unrepairable device can be trashed.
Before sending us any remote control or car key, please send an email to store@creasol.it with any information about the device, defect and, if possible, a picture that shows the defect.
Active filters
Long range 433.92 MHz remote control duplicator, in light-weight soft-touch shell
Remote control duplicator that is able to copy up to 4 remote controls which transmit in these frequencies: 433.92, 868.3, 315, 403.55, 418, 286-360, 384-400 MHz.
Four buttons, automatic frequency detection, very easy programming, nice look!
Can operate in different frequencies (one for each button).
Remote control transmitter and duplicator, 433.920 MHz.
Easily copy almost all fixed-code remote controls in the market.
High performance filtered antenna with stainless steel wall mount bracket, with 3m coax cable RG58 and male-SMA connector.
3m coax cable, RG58, and SMA male connector. Suitable for RFXCOM and other transmitter, receivers, transceivers operating at 433MHz, 434MHz or 435MHz.
2.1dB gain, 2MHz bandwidth, from 433 to 435 MHz
Thanks to the narrow bandwidth, it avoids noise/interference from systems transmitting in adjacent bands.
Very high quality, long life, made in Italy.
Multifrequency remote control duplicator, in plastic case with soft touch feeling, available in 6 colors.
Automatically learn frequency and code of original remote controls, transmitting at 433.92MHz, 868.3MHz and from 220 to 418 MHz (not for EU version, where these frequencies are disabled).
Very easy to program, each button is indepent and can work in a different frequency.
Standard antenna with stainless steel wall mount bracket.
2.1dB gain, 15MHz bandwidth, from 860 to 880 MHz
Very high quality, long life, made in Italy.
High performance filtered antenna with stainless steel wall mount bracket.
2.1dB gain, 2MHz bandwidth, from 433 to 435 MHz
Very high quality, long life, made in Italy.
Thanks to the narrow bandwidth, it avoids noise/interference from systems transmitting in adjacent bands.
Standard antenna with stainless steel wall mount bracket.
2.1dB gain, 15MHz bandwidth, from 425 to 440 MHz
Very high quality, long life, made in Italy.
As remote control manufacturers, we have the knowledge to repair faulty remote controls.
We provide the remote control repairs service for a fixed price.
Multifrequency long range transmitter and remote control duplicator, which can be connected to 1-4 external switches. Transmission frequency and transmission power can be selected by the user, independetly for each channel, using the Prog button. When each switch changes its state, SenderB att starts transmitting the programmed/recorded code in the selected frequency.
Suitable for domotic systems, to transmits up to 4 or 6 different codes depending by the 4 inputs configuration.
Multifrequency long-range remote control duplicator which should be connected, by a pushbutton, to an external power supply. Can be used inside a car, to open gate/door, by flashing highbeam lights or brake pedal.
Copy up to 4 fixed-code remote controls, even in different frequencies.
Italiano
English
Deutsch
Français
Español
Português
Dutch
Danish
Norwegian
Swedish
Finnish
Czech
Hungarian
Latvian
Lithuanian
Polish
Romanian
Slovak
