Visiškas palaikymas: daugumą produktų sukūrėme mes!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Užsakymai išsiunčiami per 1 darbo dieną

Prioritetinis paštas: greitas ir pigus - Greitasis kurj

24 mėnesių garantija, lengvas grąžinimas / grąžinimas

Prieš grąžindami prekes susisiekite su mumis!

Creasol DomBus38: 6 relės + 1 kintamosios srovės įėjimas + 12 įėjimų

Creasol DomBus38: 6 relės + 1 kintamosios srovės įėjimas + 12 įėjimų

0 Review(s) 

DIN bėgio didelio patikimumo ir mažos galios namų automatikos modulis su relių išėjimu, žemos įtampos įėjimais ir vienu 100-250Vac įėjimu. Veikia su namų automatikos sistemomis, pvz. Domoticz, Namų asistentas, Node-RED, OpenHAB ir daugiau...

Galima priprasti prie valdyti signalizacijos jutiklius, mygtukus, šviesas ir kitas apkrovas bei stebėti 230 V buvimą (aptinkamas elektros energijos tiekimo nutraukimas).

creDomBus38
Protocol: Modbus RTU (compatible with almost any system)
95,16 €
66,61 € - 30%
Su mokesčiais Išsiunčiama per 1 darbo dieną
Kiekis
Yra

  Visiškas palaikymas: daugumą produktų sukūrėme mes!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Užsakymai išsiunčiami per 1 darbo dieną

Prioritetinis paštas: greitas ir pigus - Greitasis kurj

  24 mėnesių garantija, lengvas grąžinimas / grąžinimas

Prieš grąžindami prekes susisiekite su mumis!

domotic module with 6 relays, 1 AC input, 12 low voltage inputs

Jį galima prijungti prie namų automatikos valdiklio RS485 nuoseklia magistrale (4 laidai, 2 12/24V maitinimo šaltiniui ir 2 duomenims 115200bps).

Kaip ir kiti „DomBus“ įrenginiai, DomBus38 sukurtas taip, kad sunaudotų mažai energijos, būtų patikimas, pilnai konfigūruojamas ir paprastas naudoti.


Savybės

  • 4x 10A relės su normaliai atidarytais ir normaliai uždarytais išėjimais ant gnybtų bloko, sukonfigūruotas mažos galios režimu (apie 100 mW / kiekvienas, kai įjungta)
  • 2x 10A relės su paprastai atvirais išėjimais, sukonfigūruotais mažos galios režimu (apie 100 mW kiekvienam, kai įjungta)
  • 1x kintamosios srovės optiškai izoliuotas įėjimas aptikti (ir pranešti) elektros energijos tiekimo nutraukimai, įgyvendinant nulinio kirtimo aptikimas leisti perjungti relę, sumažinant įsibėgėjimo srovę (talpinėms apkrovoms, pvz., elektroninėms plokštėms) ir viršįtampą (indukcinei srovei, pvz., varikliams ir ritėms).
  • 10x žemos įtampos įėjimai su 10k ištraukimu rezistorius, kurį galima įjungti PCB trumpikliu: galima prijungti prie mygtukų, jungiklių, dvigubų mygtukų (aukštyn / žemyn mygtukas prijungtas prie vieno įėjimo), aliarmo jutiklių (magnetinis kontaktas, PIR, ...), skaitikliai ir skaitikliai su impulsiniu išėjimu, NTC temperatūros jutikliai,...
  • 2x žemos įtampos įėjimai su vidiniu patraukimu rezistorius, kuris gali būti neįtrauktas esant analoginiams įėjimams: gali būti prijungtas prie mygtukų, jungiklių, aliarmo jutiklių (magnetinis kontaktas, PIR, ...), skaitiklis ir skaitikliai su impulsiniu išėjimu, analoginė įtampa 0÷3,3V diapazone.< /li>
  • Vidinis RS485 magistralės galinis rezistorius (150 omų), kurį galima įjungti PCB trumpikliu (su lituokliu)
  • RS485 pramoninis autobusas, kuris veikia su iki 500 m kabeliu (naudojant standartinį signalizacijos laidą: 2x0,50+2x0,22mm² + ekranas)/li>
  • DIN bėgio žemo profilio korpusas, 115x90x40mm, 220g
  • Įskiepių gnybtų blokai (atjungiamas) lengvam laidų sujungimui
  • Galima įsigyti su 2 jūsų pasirinktomis programinės įrangos programomis:
    • „DomBus“ programinė įranga, dirba su Domoticz, įgyvendina DomBus patentuotą protokolą
    • Modbus programinė įranga, dirbantis su NodeRED, Home Assistant, OpenHAB ir daugeliu kitų valdiklių, palaikančių standartinį Modbus protokolą.
  • Labai mažas energijos suvartojimas: 15mW su išjungtomis relėmis.

Įspėjimai

  • Nemaišykite aukštos ir žemos įtampos įrenginių ant relių išvesties blokų: relės gali būti naudojamos visos prijungtos prie 115 / 230 VAC įrenginių arba visos prijungtos prie 30 Vmax įrenginių tame pačiame bloke. Pavyzdžiui, jei RL1 yra prijungtas prie 230 V įtampos, RL2÷RL4 gali būti prijungtas tik prie 230 V apkrovų, o žemos įtampos įrenginiai gali būti cprijungtas tik prie RL5÷RL6 arba atvirkščiai. Žinoma, visus RL1÷RL6 galima prijungti prie aukštos įtampos ARBA žemos įtampos apkrovos.
  • Naudokite a 4 laidų ekranuotas kabelis magistralei, naudojant dvi eilutes tiekimui maitinimo šaltinis (12 arba 24 V DC), apsaugotas saugikliu.
  • Norėdami sumažinti triukšmą ir atspindžius autobuse, įjungti užbaigimo rezistorių (už šviesos diodo trumpinamas Rbus PCB trumpiklis) dviejuose tolimiausiuose autobuso galuose.

Visą informaciją rasite puslapyje anglų kalba https://www.creasol.it/DomBus38




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

creDomBus38

Reviews

Write your review

Creasol DomBus38: 6 relės + 1 kintamosios srovės įėjimas + 12 įėjimų

DIN bėgio didelio patikimumo ir mažos galios namų automatikos modulis su relių išėjimu, žemos įtampos įėjimais ir vienu 100-250Vac įėjimu. Veikia su namų automatikos sistemomis, pvz. Domoticz, Namų asistentas, Node-RED, OpenHAB ir daugiau...

Galima priprasti prie valdyti signalizacijos jutiklius, mygtukus, šviesas ir kitas apkrovas bei stebėti 230 V buvimą (aptinkamas elektros energijos tiekimo nutraukimas).

Write your review

Jums taip pat gali patikti

Creasol DomBus38: 6 relės +...

95,16 € 66,61 €