Fullständig support: de flesta produkter är designade av oss!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Beställningar skickas inom 1 arbetsdag

Prioriterad post: snabbt och billigt - Expresskurir: sna

24 månaders garanti, enkel retur/återbetalning

Kontakta oss innan du returnerar produkter!

Creasol DomBus38: 6 reläer + 1 AC-ingång + 12 ingångar

Creasol DomBus38: 6 reläer + 1 AC-ingång + 12 ingångar

0 Review(s) 

DIN-skena hög tillförlitlighet och lågeffekts hemautomationsmodul med reläutgång, lågspänningsingångar och en 100-250Vac ingång. Fungerar med hemautomationssystem som t.ex. Domoticz, Hemassistent, Node-RED, OpenHAB och mer...

Kan användas till hantera larmsensorer, tryckknappar, lampor och andra belastningar och övervaka 230V närvaro (upptäcker strömavbrott).

creDomBus38
Protocol: Modbus RTU (compatible with almost any system)
95,16 €
66,61 € - 30%
Inkl. moms Skickas inom 1 arbetsdag
Kvantitet
Tillgängliga

  Fullständig support: de flesta produkter är designade av oss!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Beställningar skickas inom 1 arbetsdag

Prioriterad post: snabbt och billigt - Expresskurir: sna

  24 månaders garanti, enkel retur/återbetalning

Kontakta oss innan du returnerar produkter!

domotic module with 6 relays, 1 AC input, 12 low voltage inputs

Den kan anslutas till hemautomationsstyrenheten med en RS485 seriell buss (4 ledningar, 2 för 12/24V strömförsörjning och 2 för data vid 115200bps).

Som andra DomBus-enheter, DomBus38 är designad för att förbruka låg effekt, vara pålitlig, fullt konfigurerbar och enkel att använda.


Drag

  • 4x 10A reläer med både normalt öppna och normalt slutna utgångar på plint, konfigurerad i lågeffektläge (cirka 100mW/styck, när på)
  • 2x 10A reläer med normalt öppna utgångar, konfigurerade i lågeffektläge (cirka 100mW/styck, när på)
  • 1x AC optoisolerad ingång att upptäcka (och meddela) strömavbrott, genomföra nollgenomgångsdetektering för att tillåta reläomkoppling som minimerar inkopplingsströmmen (för kapacitiva belastningar, såsom elektroniska kort) och överspänning (för induktiv ström, såsom motorer och spolar).
  • 10x lågspänningsingångar med 10k pullup motstånd som kan aktiveras av PCB-bygel: kan anslutas till tryckknappar, strömbrytare, tvillingknappar (upp/ned-knapp ansluten till en enda ingång), larmsensorer (magnetisk kontakt, PIR, ...), räknare och mätare med pulserande utgång, NTC temperaturgivare, ...
  • 2x lågspänningsingångar med intern pullup motstånd som kan uteslutas vid analoga ingångar: kan anslutas till tryckknappar, strömbrytare, larmsensorer (magnetkontakt, PIR, ...), räknare och mätare med pulsutgång, analoga spänningar i området 0÷3.3V.< /li>
  • Internt RS485-bussavslutningsmotstånd (150 ohm) som kan aktiveras av en PCB-bygel (med lödkolv)
  • RS485 industribuss, som fungerar med upp till 500 m kabel (med standardlarmkabel: 2x0,50+2x0,22mm² + skärm)/li>
  • DIN-skena lågprofilhölje, 115x90x40mm, 220g
  • Plugin plintar (frånkopplingsbar) för enkel kabeldragning
  • Tillgänglig med 2 fasta program som du väljer:
    • DomBus firmware, arbetar med Domoticz, implementerar DomBus proprietära protokoll
    • Modbus firmware, som arbetar med NodeRED, Home Assistant, OpenHAB och många andra kontroller som stöder standard Modbus-protokoll.
  • Mycket låg strömförbrukning: 15mW med reläer AV.

Varningar

  • Blanda inte hög- och lågspänningsenheter på reläutgångsblock: reläer kan användas alla anslutna till 115 / 230Vac enheter, eller alla anslutna till 30Vmax enheter inom samma block. Till exempel om RL1 är ansluten till 230V, kan RL2÷RL4 endast anslutas till 230V-laster, och lågspänningsenheter kanansluten endast till RL5÷RL6, eller vice versa. Naturligtvis är det möjligt att ansluta alla RL1÷RL6 till högspännings ELLER lågspänningsbelastningar.
  • Använd a 4 ledare skärmad kabel för bussen, med två rader för att mata strömförsörjning (12 eller 24Vdc) skyddad av en säkring.
  • För att minska buller och reflektioner på bussen, aktivera termineringsmotståndet (kortar Rbus PCB-bygel bakom lysdioden) på bussens två yttersta ändar.

Fullständig information tillgänglig på den engelska sidan https://www.creasol.it/DomBus38




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

creDomBus38

Reviews

Write your review

Creasol DomBus38: 6 reläer + 1 AC-ingång + 12 ingångar

DIN-skena hög tillförlitlighet och lågeffekts hemautomationsmodul med reläutgång, lågspänningsingångar och en 100-250Vac ingång. Fungerar med hemautomationssystem som t.ex. Domoticz, Hemassistent, Node-RED, OpenHAB och mer...

Kan användas till hantera larmsensorer, tryckknappar, lampor och andra belastningar och övervaka 230V närvaro (upptäcker strömavbrott).

Write your review

Du kanske också gillar

Creasol DomBus38: 6 reläer...

95,16 € 66,61 €