Fullständig support: de flesta produkter är designade av oss!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Beställningar skickas inom 1 arbetsdag

Prioriterad post: snabbt och billigt - Expresskurir: sna

24 månaders garanti, enkel retur/återbetalning

Kontakta oss innan du returnerar produkter!

Creasol DomBus33 - Domoticz-modul med 3 reläer, 3 AC-ingångar, 5 I/O för befintliga ljussystem

Creasol DomBus33 - Domoticz-modul med 3 reläer, 3 AC-ingångar, 5 I/O för befintliga ljussystem

0 Review(s) 

DIN-skena modul designad för att domotisera 3 befintliga lampor med 230V tryckknapp och steg-för-steg-relä.
Reläet används för att växla det externa steg-för-steg-reläet (sänder en puls till dess 230V-spole) och AC-ingången används för att övervaka ljusets status (PÅ/AV).
De 5 analoga/digitala I/O-erna kan anslutas till lågspänningstryckknappar, räknare, temperaturavstånd och larmgivare.

creDomBus33
Protocol: Modbus RTU (compatible with almost any system)
62,22 €
43,55 € - 30%
Inkl. moms Skickas inom 1 arbetsdag

Mängdrabatter

Kvantitet Mängdrabatt Pris Du Sparar
1 30% 43,55 € 18,67 €
2 32% 42,31 € 39,82 €
Kvantitet
Tillgängliga

  Fullständig support: de flesta produkter är designade av oss!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Beställningar skickas inom 1 arbetsdag

Prioriterad post: snabbt och billigt - Expresskurir: sna

  24 månaders garanti, enkel retur/återbetalning

Kontakta oss innan du returnerar produkter!

DomBus33 är enDIN-RAIL-modul, 54 mm bred,med3 reläutgångar,3 AC-ingångaroch5 lågspännings I/Otillgänglig med två olika firmwares:

  • DomBus proprietära protokoll, användbart med Domoticz: integrerar DCMD (kommandon skickas till samma eller andra moduler när en ingång/sensor ändras, som KNX)
  • Modbus standardprotokoll, kan användas med Home Assistant, OpenHAB, Node-RED, ...

DomBus33 har samma hårdvara somDomBus32men med firmware speciellt utformad för att styra/övervaka ljus: på sitt sätt kan ljuset aktiveras av befintliga 230V-tryckknappar (som skickar pulser till stegreläspolen), och även av den domotiska styrenheten (scener, grupper, släckning av allt ljus när du lämnar byggnaden, styr ljuset med smarttelefonen, aktivera ljuset slumpmässigt när larmsystemet är i AWAY-läge, ...)./p>

DomBus32, Domoticz relay module

Relay module for DomoticzModule Relay Domoticz Home Automation System

För att förenkla kabeldragningen har kopplingsplinten 3 plintar för reläer, 3 för AC-ingångar och 1 gemensam plint (att anslutas till neutral eller linje): på så sätt är det enklare och snabbare att ansluta the-modulen till elektriska laster som delar samma effektbrytare (t.ex. ljussystem, värmesystemsventiler, ...). Vänligen se tillanslut endast laster som är skyddade av samma RCCB (strömbrytare). Naturligtvis är det möjligt att använda reläer för att koppla om lågspänningsbelastningar eller välja arbetsläge för en maskin (till exempel värmepump), för att ansluta den gemensamma ledningen till GND- eller DC-matningsspänning: i detta fall är de 3 AC-ingångarna värdelösa.

Som andra DomBus-moduler,alla portar kan konfigureras på många olika sätt, och även denna modulstöder DCMD, kommandon som skickas till samma eller andra DomBus-moduleratt utföra enkla åtgärder som gör det möjligt att uppnå hög tillförlitlighet (DCMD-kommandon fungerar även om domotic-styrenheten inte fungerar) och enkel programmering (behöver inte skapa automatiseringar i hemautomationskontrollern: konfigurera bara DomBus-portar för att utföra åtgärder på händelser). Sist men inte minst, som andra DomBus-moduler, är DomBus33optimerad för att få låg strömförbrukning, mindre än 10mW normalt (0,75mA @13,6V) och mindre än 150mW när alla 3 reläerna är PÅ (10mA @13,6V).

Domoticz module with 3 relay outputs, 3 AC inputs, 5 configurable inputs/outputs

Funktioner

  • 3 reläutgångar, 250Vac 5A max, med överspänningsskydd (varistorer)
  • 3 AC-ingångar, 110-230V, för att övervaka spänning på laster
  • 1 gemensamt plint (för neutral-, linje- eller gemensam spänning), för att förenkla anslutningar
  • 5 programmerbara I/O
  • 8-25Vdc strömförsörjning
  • 10mW strömförbrukning
  • 150mW max strömförbrukning
  • 52x89x65mm

Ansökningar

  • Slå på/stänga av upp till 3 lampor eller andra belastningar
  • Kontrollera att apparater levereras (t.ex. kontrollera att värmepumpen är korrekt tillförd under vintern, för att förhindra att den idrauliska kretsen går sönder under vintern när temperaturen faller under 0°C)
  • Slå på/stänga av värmesystemets ventiler
  • Anslut externa tryckknappsbrytare, omkopplare, dubbla tryckknappar, S0-räknare, ....
  • Anslut upp till 5 PIR, magnetiska kontaktsensorer eller andra lågspänningsenheter.
  • Gränssnitt upp till 3 PIR:er med 230V-utgång för att aktivera extern belysning och starta inspelning (NVR eller DVR)
  • ....




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

creDomBus33

Reviews

Write your review

Creasol DomBus33 - Domoticz-modul med 3 reläer, 3 AC-ingångar, 5 I/O för befintliga ljussystem

DIN-skena modul designad för att domotisera 3 befintliga lampor med 230V tryckknapp och steg-för-steg-relä.
Reläet används för att växla det externa steg-för-steg-reläet (sänder en puls till dess 230V-spole) och AC-ingången används för att övervaka ljusets status (PÅ/AV).
De 5 analoga/digitala I/O-erna kan anslutas till lågspänningstryckknappar, räknare, temperaturavstånd och larmgivare.

Write your review

Du kanske också gillar

Kunder som köpt denna produkt köpte också:

Creasol DomBus33 -...

62,22 € 43,55 €