Täysi tuki: suurin osa tuotteista on meidän suunnittelemamme!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Tilaukset toimitetaan 1 työpäivän sisällä

Priority mail: nopea ja edullinen - Pikakuriiri: nope

24 kuukauden takuu, helppo palautus/palautus

Ota yhteyttä ennen tuotteiden palautusta!

Creasol DomBus31: 8 releen moduuli kodin automaatiojärjestelmään, erittäin alhainen virrankulutus

Creasol DomBus31: 8 releen moduuli kodin automaatiojärjestelmään, erittäin alhainen virrankulutus

1 Review(s) 

Creasol DomBus31 on kiskokiskorelemoduuli, 115x90x40mm,8 relelähtöä. 6 releet ovat SPST (normaalisti avoimet lähdöt), joissa on enintään 250 V 5A: n kyky, ja 2 releet ovat SPDT (normaalisti avoimet ja normaalisti suljetut lähdöt), joiden kyky on 10 A. Se voidaan liittää Domoticz-ohjaimeen RS485-sarjaväylällä (4 johtoa, 2 12 / 24V virtalähteelle ja 2 tiedonsiirrolle nopeudella 115200 bps).Kuten muutkin DomBus-laitteet,DomBus31 tarjoaa erinomaisen suorituskyvyn virran optimoinnissa: kaikkien 8 releen ollessa aktiivisia (pahimmassa tapauksessa) virrankulutus on vain 500 mW!Vertailun vuoksi voidaan todeta, että KMTronic 8 -relemoduuli kuluttaa 12 W, Denkovi 8 -rele-levy noin 3 W, Sonoff Dual R2 kuluttaa 2 W, kun vain 2 relettä on käytössä.Sopii käytettäväksiDomoticz-releiden moduuli: yksinker

creDomBus31
Protocol: Modbus RTU (compatible with almost any system)
58,56 €
40,99 € - 30%
Sisältää alv:n Lähetetään 1 työpäivässä

Määräalennus

Määrä Määräalennus Hinta Säästät
1 30% 40,99 € 17,57 €
2 32% 39,82 € 37,48 €
3 34% 38,65 € 59,73 €
4 35% 38,06 € 81,98 €
6 36% 37,48 € 126,49 €
9 37% 36,89 € 195,00 €
Määrä
Saatavilla

  Täysi tuki: suurin osa tuotteista on meidän suunnittelemamme!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Tilaukset toimitetaan 1 työpäivän sisällä

Priority mail: nopea ja edullinen - Pikakuriiri: nope

  24 kuukauden takuu, helppo palautus/palautus

Ota yhteyttä ennen tuotteiden palautusta!

Creasol DomBus31 on kiskokiskorelemoduuli, 115x90x40mm,8 relelähtöä. 6 releet ovat SPST (normaalisti avoimet lähdöt), joissa on enintään 250 V 5A: n kyky, ja 2 releet ovat SPDT (normaalisti avoimet ja normaalisti suljetut lähdöt), joiden kyky on 10 A. Se voidaan liittää Domoticz-ohjaimeen RS485-sarjaväylällä (4 johtoa, 2 12 / 24V virtalähteelle ja 2 tiedonsiirrolle nopeudella 115200 bps).

Kuten muutkin DomBus-laitteet,DomBus31 tarjoaa erinomaisen suorituskyvyn virran optimoinnissa: kaikkien 8 releen ollessa aktiivisia (pahimmassa tapauksessa) virrankulutus on vain 500 mW!Vertailun vuoksi voidaan todeta, että KMTronic 8 -relemoduuli kuluttaa 12 W, Denkovi 8 -rele-levy noin 3 W, Sonoff Dual R2 kuluttaa 2 W, kun vain 2 relettä on käytössä.

Sopii käytettäväksiDomoticz-releiden moduuli: yksinkertaisen 4-johtimisen suojatun kaapelin avulla se on mahdollistatoimittaa ja yhdistää jopa 30 tällaista moduulia RS485 ModBus -protokollan kauttajo toteutettu Domoticzissa (laajennus on asennettava):RS485 on vahva viestintäjärjestelmä, liitettävyys on helpompaa kuin ethernet, ilman RF-pilaantumista ja sisältää jo väyläkaapelissa 12 / 24V virtalähteen.

p>

Creasol DomBus31 8 relays module for domoticz home automation systemcreDomBus31 layout vahva>

p>

Creasol DomBus 8 relay module for Domoticz home automation system

Domoticz relay board 8 relays

ominaisuudet

  • 6 relelähtöä, SPST(normaalisti auki kosketin ruuviliittimessä)250Vac / 30Vdc 5Akosketin (enintään 30 V DC DC-kuormituksessa, 250 V AC AC-kuormituksessa).
  • 2 relelähtöä, SPDT(normaalisti auki ja normaalisti kiinni olevat koskettimet ruuviliittimessä)250V 10Ayhteystietoja.
  • Releet on jaettu 3 lohkoon.Älä sekoita korkea- ja matalajännitesignaaleja saman lohkon sisällä!
  • 8-35 V DC: n virtalähde (sisäisesti säädetty kytkentätilan virtalähdepiireillä, jotka minimoivat virrankulutuksen ja hukkaantumisen)
  • pieni virrankulutus: 0,75 mA @ 12 V (9mW)valmiinavirran ollessa kaikkien releiden ollessa POIS PÄÄLTÄ, ja 41mA @ 12V (500mW) kanssakaikki releet PÄÄLLÄ.
  • 115200 bps RS485-bussi (enimmäispituus: 1km).

div>

DomBus31-porttien ominaisuudet

Oletusosoite: 0xff31

Portti # Nimi Kyvyt Oletuskokoonpano Kuvaus
1 OUT1 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST-relelähtö, EI kosketinta, 5A 250Vac tai 30Vdc lähtö. Releen kosketinta suojaa varistori
2 OUT2 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST-relelähtö, EI kosketinta, 5A 250Vac tai 30Vdc lähtö. Releen kosketinta suojaa varistori
3 OUT3 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST-relelähtö, EI kosketinta, 5A 250Vac tai 30Vdc lähtö. Releen kosketinta suojaa varistori
4 OUT4 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST-relelähtö, EI kosketinta, 5A 250Vac tai 30Vdc lähtö. Releen kosketinta suojaa varistori
5 OUT5 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST-relelähtö, EI kosketinta, 5A 250Vac tai 30Vdc lähtö. Releen kosketinta suojaa varistori
6 OUT6 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST-relelähtö, EI kosketinta, 5A 250Vac tai 30Vdc lähtö.Releen kosketinta suojaa varistori
7 OUT7 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPDT-relelähtö, NO + NC-koskettimet, 10A 250Vac tai 250Vdc lähtö. Releen kosketinta suojaa varistori
8 OUT8 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND(1) OUT_RELAY_LP SPDT-relelähtö, NO + NC-koskettimet, 10A 250Vac tai 250Vdc lähtö. Releen kosketinta suojaa varistori

(1): voidaan käyttää BLIND-ulostulona kaihtimen / verhon avaamiseen, mutta vain edellinen portti voidaan määrittää Domoticzissa nimellä OUT_BLIND, koska kun OUT_BLIND on määritetty, DomBus-laite määrittää seuraavan portin ajamaan releä avoimessa tilassa suunta.

Sovellushuomautukset

Lämmitys / tuuletusjärjestelmä

Seuraavat yksinkertaiset kaaviot esittävät liitäntää lämpöpumppuun (ohjattu pienjännitesignaaleilla), ilmanvaihtojärjestelmään (ohjattu pienjännitesignaaleilla) ja 3-läpiventtiiliin (toimittaa 230 Vac).

Domoticzilla on helppo saada lämmitys- / jäähdytysjärjestelmä lämpöpumpulla, joka on optimoitu kuluttamaan suurimman osan aurinkosähköstä, ja uusiutuvalla ilmalla ohjattu mekaaninen ilmanvaihto jäähdyttimellä ja kelalla, joka säätelee suhteellista kosteutta maksimaalisen mukavuuden saavuttamiseksi.

Turvallisuussyistä, älä sekoita korkeaa ja matalaa jännitettä samassa lohkossa! Esimerkiksi se ei ole turvallistakytke Block3: ssa 230 V: n venttiili RL8: een ja 12/24 V: n venttiili RL7: een! Jokaisessa relelohkossa on mahdollista käyttää vain matalajännitteisiä tai vain suurjännitekuormituksia.

Controlling heat pump and ventilation by Domoticz + Creasol DomBus31 relay module

ADOTL-reititin, jota ohjaa Domoticz-komentosarja, estääkseen jumittumisen

Seuraava kaavio näyttää, kuinka SPDT-releen normaalisti suljettua kosketinta käytetään reitittimen toimittamiseen.
Komentosarja tarkistaa, että Internet toimii, ja vikatilanteessa aktivoi nollaus kytkeäksesi virtalähteen pois päältä 10 sekunniksi, nollaten reitittimen.

Supply a ADSL router by Domoticz + DomBus31 to prevent internet hang-up

LISÄTIETOJAhttps://www.creasol.it/CreasolDomBus31




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

creDomBus31

Reviews

Write your review

Creasol DomBus31: 8 releen moduuli kodin automaatiojärjestelmään, erittäin alhainen virrankulutus

Creasol DomBus31 on kiskokiskorelemoduuli, 115x90x40mm,8 relelähtöä. 6 releet ovat SPST (normaalisti avoimet lähdöt), joissa on enintään 250 V 5A: n kyky, ja 2 releet ovat SPDT (normaalisti avoimet ja normaalisti suljetut lähdöt), joiden kyky on 10 A. Se voidaan liittää Domoticz-ohjaimeen RS485-sarjaväylällä (4 johtoa, 2 12 / 24V virtalähteelle ja 2 tiedonsiirrolle nopeudella 115200 bps).Kuten muutkin DomBus-laitteet,DomBus31 tarjoaa erinomaisen suorituskyvyn virran optimoinnissa: kaikkien 8 releen ollessa aktiivisia (pahimmassa tapauksessa) virrankulutus on vain 500 mW!Vertailun vuoksi voidaan todeta, että KMTronic 8 -relemoduuli kuluttaa 12 W, Denkovi 8 -rele-levy noin 3 W, Sonoff Dual R2 kuluttaa 2 W, kun vain 2 relettä on käytössä.Sopii käytettäväksiDomoticz-releiden moduuli: yksinker

Write your review

Saatat pitää myös

Asiakkaat, jotka ostivat tämän tuotteen, ostivat myös seuraavia tuotteita:

Creasol DomBus31: 8 releen...

58,56 € 40,99 €