Suport complet: majoritatea produselor sunt concepute de noi!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Comenzile sunt expediate în termen de 1 zi lucrătoare

Poștă prioritară: rapid și ieftin - Curie

24 de luni garanție, returnare/rambursare ușoară

Contactați-ne înainte de a returna produsele!

Creasol DomBus31: Modul de 8 relee pentru sistemul de automatizare a casei, cu un consum foarte redus de energie

Creasol DomBus31: Modul de 8 relee pentru sistemul de automatizare a casei, cu un consum foarte redus de energie

1 Review(s) 

Creasol DomBus31 este un modul de releu din-rail, 115x90x40mm,cu 8 ieșiri de relee. 6 relee sunt SPST (ieșiri normal deschise) cu capacitate maximă de 250V 5A, iar 2 relee sunt SPDT (ieșiri normal deschise și normal închise) cu capacitate 10A. Poate fi conectat la controlerul Domoticz printr-o magistrală serială RS485 (4 fire, 2 pentru sursa de alimentare 12 / 24V și 2 pentru date la 115200bps).Ca și alte dispozitive DomBus,DomBus31 oferă performanțe excelente în ceea ce privește optimizarea puterii: cu toate cele 8 relee active (cel mai rău caz), consumul de energie este de numai 500mW!Ca o comparație, modulul KMTronic 8 relee consumă 12W, placa Denkovi 8 relee consumă aproximativ 3W, Sonoff Dual R2 consumă 2W cu doar 2 relee activate.Potrivit pentru a fi folosit caModulul de relee Domot

creDomBus31
Protocol: Modbus RTU (compatible with almost any system)
58,56 €
40,99 € - 30%
Include TVA Livrat in 1 zi lucratoare

Reduceri la volum

Cantitate Reducere de cantitate Pret Ai economisit
1 30% 40,99 € 17,57 €
2 32% 39,82 € 37,48 €
3 34% 38,65 € 59,73 €
4 35% 38,06 € 81,98 €
6 36% 37,48 € 126,49 €
9 37% 36,89 € 195,00 €
Cantitate
Disponibil

  Suport complet: majoritatea produselor sunt concepute de noi!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Comenzile sunt expediate în termen de 1 zi lucrătoare

Poștă prioritară: rapid și ieftin - Curie

  24 de luni garanție, returnare/rambursare ușoară

Contactați-ne înainte de a returna produsele!

Creasol DomBus31 este un modul de releu din-rail, 115x90x40mm,cu 8 ieșiri de relee. 6 relee sunt SPST (ieșiri normal deschise) cu capacitate maximă de 250V 5A, iar 2 relee sunt SPDT (ieșiri normal deschise și normal închise) cu capacitate 10A. Poate fi conectat la controlerul Domoticz printr-o magistrală serială RS485 (4 fire, 2 pentru sursa de alimentare 12 / 24V și 2 pentru date la 115200bps).

Ca și alte dispozitive DomBus,DomBus31 oferă performanțe excelente în ceea ce privește optimizarea puterii: cu toate cele 8 relee active (cel mai rău caz), consumul de energie este de numai 500mW!Ca o comparație, modulul KMTronic 8 relee consumă 12W, placa Denkovi 8 relee consumă aproximativ 3W, Sonoff Dual R2 consumă 2W cu doar 2 relee activate.

Potrivit pentru a fi folosit caModulul de relee Domoticz: folosind un cablu simplu ecranat cu 4 fire este posibilalimentează și interconectează până la 30 de module ca acesta, prin protocolul RS485 ModBusdeja implementat în Domoticz (trebuie instalat un plugin):RS485 este un sistem de comunicații puternic, mai ușor de conectat decât Ethernet, fără poluare RF și include deja o sursă de alimentare de 12 / 24V în cablul de magistrală.

p>

Creasol DomBus31 8 relays module for domoticz home automation systemcreDomBus31 layout puternic>

p>

Creasol DomBus 8 relay module for Domoticz home automation system

Domoticz relay board 8 relays

Caracteristici

  • 6 ieșiri cu releu, SPST(contact normal deschis pe blocul de borne cu șurub) cu250Vac / 30Vdc 5Acontact (max 30Vdc în cazul unei sarcini DC, 250Vac în cazul unei sarcini AC).
  • 2 ieșiri cu releu, SPDT(contacte în mod normal deschise și închise în mod normal pe bornier cu șurub) cu250V 10Acontacte.
  • Releele sunt împărțite în 3 blocuri, fiecare bloc respectă distanța de fluaj față de alte blocuri.Nu amestecați semnale de înaltă și joasă tensiune în interiorul aceluiași bloc!
  • Sursă de alimentare de 8-35Vcc (reglată intern de un circuit de alimentare cu regim de comutare care minimizează consumul și disiparea de energie).
  • consum redus de energie: 0,75mA @ 12V (9mW)așteptarecurent cu toate releele OFF, și 41mA @ 12V (500mW) cutoate relele sunt PORNITE.
  • Autobuz RS485 de 115200 bps (lungime maximă: 1 km).

div>

Capabilități Porturi DomBus31

Adresă implicită: 0xff31

Port# Nume Capacități Configurare implicită Descriere
1 OUT1 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPST, contact NO, capacitate de ieșire 5A 250Vac sau 30Vdc. Contactul releului este protejat de varistor
2 OUT2 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPST, contact NO, capacitate de ieșire 5A 250Vac sau 30Vdc. Contactul releului este protejat de varistor
3 OUT3 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPST, contact NO, capacitate de ieșire 5A 250Vac sau 30Vdc. Contactul releului este protejat de varistor
4 OUT4 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPST, contact NO, capacitate de ieșire 5A 250Vac sau 30Vdc. Contactul releului este protejat de varistor
5 OUT5 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPST, contact NO, capacitate de ieșire 5A 250Vac sau 30Vdc. Contactul releului este protejat de varistor
6 OUT6 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPST, contact NO, capacitate de ieșire 5A 250Vac sau 30Vdc.Contactul releului este protejat de varistor
7 OUT7 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP Ieșire releu SPDT, contacte NO + NC, capacitate de ieșire 10A 250Vac sau 250Vdc. Contactul releului este protejat de varistor
8 OUT8 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND(1) OUT_RELAY_LP Ieșire releu SPDT, contacte NO + NC, capacitate de ieșire 10A 250Vac sau 250Vdc. Contactul releului este protejat de varistor

(1): poate fi folosit ca ieșire BLIND, pentru a deschide un blind / cortină, dar numai portul anterior poate fi configurat în Domoticz ca OUT_BLIND deoarece, atunci când este configurat ca OUT_BLIND, dispozitivul DomBus configurează automat următorul port pentru a conduce un releu în deschidere direcţie.

Note de aplicare

Sistem de încălzire / ventilație

Următoarele diagrame simple reprezintă conexiunea la o pompă de căldură (controlată prin semnale de joasă tensiune), un sistem de ventilație (controlat prin semnale de joasă tensiune) și o supapă 3-via (furnizată de 230Vac).

Cu Domoticz este ușor să obțineți un sistem de încălzire / răcire cu pompă de căldură, optimizat pentru a consuma cea mai mare energie din fotovoltaic, și o ventilație mecanică controlată prin aer regenerabilă cu răcitor și bobină care reglează umiditatea relativă pentru a obține confortul maxim.

Din motive de securitate, nu amestecați sarcini de înaltă și joasă tensiune în același bloc! De exemplu, nu este sigur săconectați, pe Block3, o supapă de 230V la RL8 și o supapă de 12 / 24V la RL7! Pe fiecare bloc de relee este posibil să se utilizeze numai sarcini de joasă tensiune sau numai de înaltă tensiune.

Controlling heat pump and ventilation by Domoticz + Creasol DomBus31 relay module

Router ADSL controlat de scriptul Domoticz pentru a preveni blocarea

Următoarea schemă arată cum să utilizați contactul normal închis al releului SPDT pentru a furniza un router.
Un script va verifica dacă internetul funcționează și, în caz de defecțiune, activați resetarea pentru a opri alimentarea cu energie electrică timp de 10 secunde, resetând routerul.

Supply a ADSL router by Domoticz + DomBus31 to prevent internet hang-up

MAI MULTE INFORMAȚII LAhttps://www.creasol.it/CreasolDomBus31




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

creDomBus31

Reviews

Write your review

Creasol DomBus31: Modul de 8 relee pentru sistemul de automatizare a casei, cu un consum foarte redus de energie

Creasol DomBus31 este un modul de releu din-rail, 115x90x40mm,cu 8 ieșiri de relee. 6 relee sunt SPST (ieșiri normal deschise) cu capacitate maximă de 250V 5A, iar 2 relee sunt SPDT (ieșiri normal deschise și normal închise) cu capacitate 10A. Poate fi conectat la controlerul Domoticz printr-o magistrală serială RS485 (4 fire, 2 pentru sursa de alimentare 12 / 24V și 2 pentru date la 115200bps).Ca și alte dispozitive DomBus,DomBus31 oferă performanțe excelente în ceea ce privește optimizarea puterii: cu toate cele 8 relee active (cel mai rău caz), consumul de energie este de numai 500mW!Ca o comparație, modulul KMTronic 8 relee consumă 12W, placa Denkovi 8 relee consumă aproximativ 3W, Sonoff Dual R2 consumă 2W cu doar 2 relee activate.Potrivit pentru a fi folosit caModulul de relee Domot

Write your review

S-ar putea sa-ti placa

Clientii care au cumparat acest produs au mai cumparat si:

Creasol DomBus31: Modul de...

58,56 € 40,99 €