Creasol SenderBatt: 4-channel duplicateur / émetteur de télécommande multifréquence stationnaire

Creasol SenderBatt: duplicateur / émetteur de télécommande multifréquence fixe 4 canaux

Name: Creasol SenderBatt: duplicateur / émetteur de télécommande multifréquence fixe 4 canaux
Brand: Creasol
SKU: creSenderBatt
Price: 33.18 EUR
Availability: BackOrder

0 Review(s)

Émetteur multifréquence longue portée et duplicateur de télécommande, pouvant être connectés à 1 à 4 commutateurs externes. La fréquence d'émission et la puissance d'émission peuvent être sélectionnées par l'utilisateur, indépendamment pour chaque canal, à l'aide du bouton Prog. Lorsque chaque commutateur change d'état, le SenderB att commence à transmettre le code programmé / enregistré dans la fréquence sélectionnée.

Convient aux systèmes domotiques, pour transmettre jusqu'à 4 ou 6 codes différents selon la configuration des 4 entrées.

Référence: creSenderBatt

Sorry, This item is out of stock.

48,80 €

33,18 € - 32%

TTC Veuillez utiliser la boîte de discussion pour demander un délai

Remise sur la quantité

Quantité	Remise sur prix unitaire	Prix	Vous économisez
1	32%	33,18 €	15,62 €
2	35%	31,72 €	34,16 €
3	37%	30,74 €	54,17 €
4	39%	29,77 €	76,13 €
6	42%	28,30 €	122,98 €
9	45%	26,84 €	197,64 €

Quantité

Sera disponible bientôt

Support complet : la plupart des produits sont conçus par nos soins !

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Les commandes sont expédiées sous 1 jour ouvrable

Courrier prioritaire : rapide et pas cher - C

Garantie 24 mois, retour/remboursement facile

Contactez-nous avant de retourner les produits !

</ p>

Cet émetteur compact, 41x31x11mm, peut être connecté à 1-4 commutateurs externes afin que, lorsqu'un commutateur est enfoncé ou relâché, il commence à transmettre.Il est fourni préprogrammé avec 4 codes aléatoires, maisil est également possible de copier jusqu'à 4 télécommandesqui transmettent un code fixe dans les fréquences prises en charge, répertoriées dans le Tab.1.

Les canaux 1 et 2 peuvent être programmés pour être activés lorsque le commutateur se ferme, s'ouvre ou dans les deux cas, tandis que les canaux 3 et 4 ne fonctionnent qu'en mode normalement ouvert(transmettre lorsque l'interrupteur correspondant se ferme). En outre, l'appareil peut transmettre un code différent lorsque l'interrupteur est fermé et ouvert. Voir ci-dessous.

La fréquence de transmission, la puissance(de 10uW à 10mW),longueur(nombre maximum de télégrammes à transmettre)et d'autres paramètres, peuvent être simplement configurés, pour n'importe quel canal, en utilisant leProgrammebouton: n'importe quel canal est indépendant de l'autre, il est donc possible, par exemple, d'avoir un canal programmé pour transmettre à 433,92 MHz, un autre à 868,3 MHz, et ainsi de suite.

En configurant pour chaque canal la puissance d'émission appropriée, il est possible de minimiser les interférences et les collisions, or maximiser la distance: il a une très longue portée lorsque la puissance d'émission maximale est sélectionnée.

Le commutateur # 1 se ferme => Transmettre le code # 1 si Par.9 = 1 ou 3
Le commutateur n ° 2 se ferme => Transmettre le code n ° 2 si le Par.9 = 1 ou 3
Le commutateur n ° 3 se ferme => Transmettre le code n ° 3
Le commutateur n ° 4 se ferme => Transmettre le code n ° 4
Le commutateur # 1 s'ouvre => Transmettre le code # 5 si Par.9 = 2 ou 3
Le commutateur # 2 s'ouvre => Transmettre le code # 6 si Par.9 = 2 ou 3

Par exemple, si le canal 1 est programmé avec le Par.9 = 3, il transmet le code # 1 lorsque le commutateur # 1 se ferme, et transmet le code # 5 lorsque le commutateur # 1 s'ouvre. Ceci peut être utilisé, par exemple pour notifier l'état de la fenêtre ou de la porte: lorsque la fenêtre s'ouvre, arrêtez la climatisation; lorsque la fenêtre se ferme, démarrez le système de climatisation.

Liste des fréquences prises en charge

Peut également être utilisé pour ouvrir un portail, une porte de garage ou une barrière de circulation, comme d'autres automatismes domestiques (appareils domotiques), en appuyant sur un ou plusieurs interrupteurs à bouton.

Il est fourni par la pile interne CR2032 3V, mais il est possible de connecter en externe 2 piles AA NiMH ou alcalines pour obtenir une durée de vie prolongée.

Schéma de connexion du transmetteur Creasol SenderBatt / moniteur de panne de courant </ p>

</ p>

Il est fourni dans une belle coque transparente recyclable avec des instructions imprimées en 2 langues ou plus. Les entreprises qui souhaitent distribuer ce produit peuvent envoyer une demande àsales@creasol.iten précisant les détails de l'entreprise, y compris le numéro de TVA.Nous pouvons également fournir à cet appareil des instructions personnalisées avec le logo de votre client, le nom, les détails et les langues préférées.

Documentation

Instructions Creasol SenderBatt au format PDF

Vidéo Creasol SenderBatt
Notes d'application Creasol SenderBatt
Notes d'application qui montre nos produits en bref et quelques exemples / schémas, au format PDF

creasolMultiFourRecLock

Remote controls compatible with Creasol Sender and Creasol SenderBatt

Cannot find your remote control in the Compatible and Incompatible tables below?
Please send a message by Telegram or Whatsapp to +393283730010 including remote control pictures, brand and model.

Company	Frequency	Models	Photo	*Frequency value (cmd=5)*	*Notes*
ADYX	433.920	ALIZE EM2C, ALIZE EM4C		2
AETERNA	433.920	TX433 1,2,4 buttons		2
ALLMATIC	306.000	ALLMATIC ASMX2, ASMX4		8	Original remote controls may be not stable in frequency
	433.920	ALLMATIC AEMX1, AEMX2, AEMX4		2
		EUROPE AUTO ARMY1, ARMY2, ARMY4		2
		ALLMATIC MX1, MX2, MX4		2
ALLTRONIK	433.920	S429_1, S429_2, S429_4, S429_M Be sure that your remote operates at 433.92MHz!		2
ALLTRONIK	433.920	S425		2
ANSONIC	433.920	SA 434-1E, SA434-2E, SA434-3E, SA434-4E		2
	433.920	SA 434-1MINI, SA434-2MINI, SA 434-2Midi		2
	868.350	SA 868-1E, SA 868-2E, SA868-3E, SA868-4E		3
	868.350	SA 868-1mini/M, SA 868-2mini/M (dip switch version)		3
APERTO	433.920	CPS1, CPS2, CPS		2
AVIDSEN	433.920	100601 micromark MM23164		2
		104505		2
		100951, 100955, 100550, 100400		2
BANDY	433.920			2	Not sure it work, because this is a duplicator: check the original remote control
BELFOX	433.920	DHS433-1, DHS433-2, DHS433-4, dip switch version		2
	433.920	DHS 433,92 (7733), dip switch version		2
	868.350	DHS 868,3, dipswitch version		3
	868.350	HS 868-20		3
BENINCA'	306.000	LOT1A, LOT2A, LOT4A		8	Original remote controls may be not stable in frequency
		LOTX1A, LOTX2A, LOTX4A		8	Original remote controls may be not stable in frequency
		LO.TX2PS		8	Original remote controls may be not stable in frequency
	433.920	LOT1W, LOT2W, LOT4W		2
		LOT2WMS		2
		T2WK, T4WK		2
		LOTX1W, LOTX2W, LOTX4W		2
		TO.GO2WP, TO.GO4WP, TO.GO2WK, TO.GO4WK		2
BERNER	868.300	Berner BHS140		3	Firmware Rev.03c or later
BERNER	868.300	Berner BHS130		3	Firmware Rev.03d or later
BESIDE	433.920	BEZAP		2
BESIDE	433.920	HIT		2
BETA ELETTRONICA	315.000	BETALARM 6500		4	Original remote controls may be not stable in frequency
BETA ELETTRONICA	330.000	BETALARM 5500		11	Original remote controls may be not stable in frequency
BFT	306.000	RCS		8	Original remote controls may be not stable in frequency
	315.000	VTM1, VTM2, VTM4		4	Original remote controls may be not stable in frequency
	418.000	GT01, GT02, GT04		14
	433.920	TE01, TE02 ( TEO1, TEO2 )		2
		TE04 ( TEO4 )		2
		BFT MITTO 2, MITTO 4, MITTO-2A, BFT MITTO-4A, MITTO-2M, MITTO-4M BFT TRC 1, TRC 2, TRC 4 Only if the receiver is CLONIX 1 or CLONIX 2 with DIP2 in ON position		2
BOSS Openers STEEL-LINE Automation Centurion Guardian	303.000	BOSS HT4 6211-L 1,2 and 4 buttons, Boss BHT4, Boss HT3 blue led, Guardian 2211-L, Centurion 2211L, LYNX 2211L, MODERN 2211L 1 and 2 BUTTONs, STEEL-LINE 2211L 1, 2 and 4 BUTTON, STEEL-LINE HT3 BLUE LED, Garage Door Openers BRD1, BRD2, BRD3, BRD4, BRD9, RD1, RD2, RD3, RD4, RD9, BOL4, BOL5, BOL6, BOL9, OL4, OL5, OL6		7	Only versions from March 2017: ask for confirmation
BREDA	433.920	Breda TOP432SA	Like CAME TOP432SA, blue	2
CAME	315.000	Came T312M, T314M		4	Original remote controls may be not stable in frequency
		Came TOP312, TOP314		4
		Came TOP312NA, TOP314NA		4
	433.920	Came T432, T434 Came TOP432A, TOP434A, TOP432, TOP432NA, TOP434NA, Came Came TAM432, TAM434, TAM438		2
		Came TOP432M, TOP434M		2
		Came TAM432SA		2
		Came TOP432SA		2
		Came TOP432NA, TOP434NA		2
		Came TWIN2, TWIN4		2
		CAME TOP-432EE, CAME TOP434EE		2	Note that this remote control can be programmed to generate a fixed code or a rolling code. Duplication works only if programmed as fixed code!
		CAME TOP-432EV, TOP-434EV		2
	868.350	CAME TOP862NA, Came TOP864NA		3
CARDIN	300.000	S300		6	Original remote controls may be not stable in frequency
	310.000	S301, S302		9	Original remote controls may be not stable in frequency
	433.920	S476 TX2, S476TX4		2
CASALI GENIUS	330.000			11	Original remote controls may be not stable in frequency
CASALI GENIUS	433.920	Genius 433 2, Genius 433 3, JA400 TM433, JA401 TM433		2
CASIT	306.000	ERTS92B, ERTS92T		8	Original remote controls may be not stable in frequency
	433.920	ERTS92B, ERTS92T		2
		ERTS20DB, ERTS20DQ		2
		ERTS476D, ERTS476Q		2
		TXS1, TXS2, TXS3, TXS4, TXS6 ERTS97B, ERTS97T		2
CEDAMATIC	433.920	Cedamatic AEMX4, AEMX2, AEMX1		2
CELINSA	433.920	S10 1, S10 2, SAW1, SAW2		2
CENTURION	433.920	CLASSIC, SMART, SMART2		2
CHAMBERLAIN LIFTMASTER MOTORLIFT SEARS CRAFTSMAN	300.000	Chamberlain 300MC (multicode)			Not supported yet!
	315.000	333LM			Not supported yet!
	315.000	360LM, 362LM, 363LM			Not supported yet!
	390.000	50CB, 53CB, 750CB, 753CB, 50LM, 53LM, 61LM, 62LM, 63LM, 139.53100, 139.53110, 139.53200, 139.53210			Not supported yet!
		54CB, 756CB, 54LM, 64LM, 859CB			Not supported yet!
		850CB, 853CB, 959CB, 81LM, 82LM, 83LM, 84LM, 99LM			Not supported yet!
		33LM			Not supported yet!
	418.000	4180, 4182, 4183			Not supported yet!
		4185			Not supported yet!
		787 remote less entry			Not supported yet!
	433.920	4330E, 4332E, 4333E			Not supported yet!
	433.920	4335E			Not supported yet!
CPS	433.920	TCP3, CPS, Jolly 4		2
CPS	433.920	CPS1 TCP3, CPS2 TCP3, CPS4 TCP3 EM1CV, EM2CV, EM4CV		2
DASPI	433.920	Daspi Happy2 433, Daspi Pops2		2
DASPI	433.920	Daspi Zero2, Zero2CLO, Zero4CLO		2
DEA	306.000	306 1, 306 2, 306 4		8	Original remote controls may be not stable in frequency
	306.000	306		8	Original remote controls may be not stable in frequency
	433.920	433 1, 433 2, 433 4, Gold S1, Gold S2 Dea Gold 238 S1, Dea Gold 238 S2, Dea Gold 239 S4		2
		Genie		2
		Punto S2		2
		Dea MIO TD2, MIO TD4		2
DELMA	300.000	Apollo 300, ELSAMEC Apollo 300		6	Original remote controls may be not stable in frequency
	300.000	Mizard 300 1, Mizard 300 2, King		6	Original remote controls may be not stable in frequency
	433.920	Mizard 433 1, Mizard 433 2		2
		King 433 2		2
		Style Copy 2CH (this is a code duplicator)		2
DICKERT	433.920	Dickert MAHS433 01, MAHS433 04 Note: we can NOT guarantee that it can be duplicated, because it depends by the receiver.			Not supported yet!
		Dickert S10-433A1L00, S10-433A4L00, S20-433A1L00, S20-433A4L00, S20-433A1000, S20-433A4000 Note: only RED buttons model can be duplicated!		2
		Dickert S5-433-A2L00, S5U-433-A2L00 Note: only RED buttons model can be duplicated!		2
	868.350	Dickert HS868-21 Note: only RED buttons model can be duplicated!		3
		Dickert S5-868A2L00, S5U-868A2L00 Note: only RED buttons model can be duplicated!		3
		Dickert S10-868A100, S10-868A400, S20-868A1L00, S20-868A4L00, S20-868A1000, S20-868A4000 Note: only RED buttons model can be duplicated!		3
		Dickert S5-868A2L01, S10-868A1L01, S10-868-A4L06, green buttons		3	Firmware Rev.03c or later
DIGICODE	300.000 310.000	DC5010, DC5012, DC5030, DC5032, DC5040, DC5042, DC5060, DC5062, DC5070, DC5072		6 or 9	Original remote controls may be not stable in frequency
DITEC	433.920	GOL4C		2
DOITRAND FDOITRAND	433.920	MPSTF2E JAUNE, MPSTF4E, HYPERPHONE MPSTF2E_GRISE		2
DOITRAND FDOITRAND	433.920	TS2DE, TS4DE		2
DOORHAN	433,920			2
DOORMATIC	433.920	SAW		2
DUCATI ALLDUCKS	433.920	TSAW1, TSAW2, TSAW3, TSAW4, 124 ELBER TSAW1, TSAW2, TSAW3, TSAW4 RONDY TSAW1, RONDY TSAW2, RONDY TSAW3		2
		TPR10-A, TPR20-A RONDY TPR10_A, RONDY TPR20_A		2
		TE2		2
		6203blue and transparent, with transparent buttons		2
DÜWI DUWI REV Ritter	433.920	Several models, handsender used for radio sockets		2
ELBE	433.920	501, 502, 504		2
		502a, 504a		2
		502, 504		2
ELCA	300.000	Aster 1100, Aster 1101		6	Original remote controls may be not stable in frequency
	433.920	IRIS, IRIS 9CH. Both colors red and blue		2
		ASTER2		2
		Aster 1000, Aster1001. Colors: black, blue, light grey		2
		GEMINI 9CH		2
		VIRGO		2
ELDAT MFZ	433.920	Eldat Basewave RT20-4103M-01, RT20-4104M-01, Eldat RT20-4k, Eldat RT35-4104M-01, RT35-4k, Eldat RT21-4101M-01, RT21-4102M-01, MFZ 400033 , MFZ RT20-4104M-01		2
	433.920	Eldat Basewave RT28-4101M-01, RT27-4101M-01, RT26-4101M-02, RT21-4125M-01, RT21-4139M-01, RT21-4139M-02, RT31-4139M-01, RT31-4139M-02, RTC02-4104M-01		2
	868.300	Eldat Basewave RT20-5004M-01, RT20-5003M-01, Eldat RT20-5k, Eldat RT35-5004M-01, RT35-5k, Eldat RT21-5001M-01, RT21-5002M-01, NASSAU RT20-4K		3
	868.300	Eldat Basewave RT28-5001M-01, RT27-5001M-01, RT26-5001M-02, RT21-5025M-01, RT21-5039M-01, RT21-5039M-02, RT31-5039M-01, RT31-5039M-02, RTC02-5004M-01		3
ELV CONRAD	868.350	FS20 S4, FS20 S8, FS20 S8-2, FS20 S16, FS20S16R, FS20 S20-2, FS20 S20-3		3
ELVOX	433.920	Elvox ET02 ZT03		2
	433.920	Elvox ET03, ET04		2
	868.350	Elvox ET08		3
ERONE	433.920	SETDS39433E2, SETDS39433E4		2
ERREKA	433.920	Erreka LUNA, SMAT RESON 1, RESON 2, Erreka RESON 3		2
EUROPE AUTOMATISME	306.000	ASMY1, ASMY2, ASMY4		8	Original remote controls may be not stable in frequency
	433.920	ARMY1, ARMY2, ARMY4		2
	433.920	S1, S2, S3		2
FAAC	300.000	Faac TM300S, TM300S05 H Faac TM1 300, TM2 300, TM3 300		6	Original remote controls may be not stable in frequency
	315.000	Faac T1, T2, T3 Faac TM1 315, TM2 315, TM3 315		4	Original remote controls may be not stable in frequency
	330.000	Faac TM1, TM2, TM3 Faac TM1 330, TM2 330, TM3 330		11	Original remote controls may be not stable in frequency
	418.000	Faac TM1 418 DS, TM2 418 DS, TM3 418 DS		14
	418.000	Faac TM 418SL, TM1 418SL, TM2 418 SL, TM3 418SL		14
	433.920	Faac TM1 433 DS, TM2 433 DS, TM3 433 DS TM1 433DS DPH, TM2 433DS DPH, TM3 433DS DPH		2
		Faac TML2 433 SLR, TML4 433 SLR, TML2-433-SLR, TML4-433-SLR, TML2 433 ESL, TML4 433 ESL		2
		Faac TML2 433 SLP, TML4 433 SLP, TML2-433-SLP, TML4-433-SLP		2
	868.350	Faac TM1 868 DS, TM2 868 DS, TM3 868 DS Faac TM1 868DS DPH, TM2 868DS DPH, TM3 868DS DPH		3
FADINI BPT	315.000	ASTRO75-1, ASTRO75-2, ASTRO75-4		4	Original remote controls may be not stable in frequency
	433.920	433 2M, Astro43_2m		2
	433.920	Astro433-2, Astro433-4, Astro43-2, Astro43-4		2
FERPORT	433.920	Tac1, Tac2, Tac4, Tac1k, Tac2k, Tac4k, Tac2kr		2
FUNKMODUL ELSECO	433.920	T433A2K1, T433A2K2		2
FUNKMODUL ELSECO	433.920	T433A2K4, T433A2K4n		2
GIBIDI	306.000	TS2M		8	Original remote controls may be not stable in frequency
GIBIDI	433.920	Open TMB 433, OPEN TMQ 433, OPEN OUT 2, OPEN OUT 4		2
GOBBATO	306.000	T306		8	Original remote controls may be not stable in frequency
GRIFFON	403.55	Griffon 404 MHz dip switch remotes and duplicating remotes		13
GRIFFON	433.92	Griffon 433 MHz dip switch remotes and duplicating remotes		2
GTO	318.000	GTO Mighty Mule 1/2 buttons, RB741, RB742			Not supported yet!
GTO	318.000	GTO Mighty Mule 3 buttons, RB743			Not supported yet!
GULLIVER	306.000	Gulliver MD/1, Gulliver MD/1, Gulliver MDRQ 306 LABEL		8	Original remote controls may be not stable in frequency
GULLIVER	433.920	MDW 2E		2
HAUSS	433.920	Pocket 3750-1, Pocket3750-2, Pocket 3750-4		2
HEDDOF	318.000	P219-1, P219-2			Not supported yet!
HEDDOF	318.000	P220-1, P220-2, P220-3			Not supported yet!
HORMANN HOERMANN	433.920	HSM2, HSM4, yellow buttons		2
	868.300	HS1, HS2, HS4, blue buttons		3
		HSD2		3
		HSE2, HSE4, blue buttons		3
		HSM2, HSM4, blue buttons		3
		HSP4, blue buttons		3
		HSS2, HSS4, blue buttons		3
		HSZ1-868, HSZ2-868		3
HRC	433.920			2
JAY	433.920	UBEI x1 SL1		2
JAY	433.920	UBET 11, UBET 21, UBET 31, UBET 41, UBET 61Ã‚		2
KEY AUTOMATION	433.920	900TXB-42, 900TXB-42N, 900TXP-42, 900TXP-42N		2
		900TXB-44, 900TXG-44		2
		900SUB-44, 900SUB-44N, 900SUB-44W, 900SUB-44WN		2
		900TXK-42, 900TXW-42,900TXK-44, 900TXW-44		2
KING	433.920				Not yet supported!
LABEL IUPPITER	306.000	MDR, IUPPITER 306		8	Original remote controls may be not stable in frequency
	433.920	RJW/1E, RJW/2E, RJW/4E, RJW/12E		2
	433.920	MDW/1E, MDW/2E		2
LEB	306.000	TSA4		8	Original remote controls may be not stable in frequency
	433.920	TMW		2
		TSAW2N, TSAW4N		2
		TCP3Ã‚ (this is a code duplicator)		2	Not sure it work, because this is a duplicator: check the original remote control
		TRK4		2
		TPW4		2
	868.300	TPK4		3
LINCE	433.920	LR 2035		2
LINEAR	300.000 310.000	MULTI-CODE 308911, 308913, 1089		6 or 9	Original remote controls may be not stable in frequency
		MULTI-CODE 412001, 414001, 109410, 109710		6 or 9	Original remote controls may be not stable in frequency
		MULTICODE 306010, 307010, 108210		6 or 9	Original remote controls may be not stable in frequency
		MULTI-CODE 308301, 308302		6 or 9	Original remote controls may be not stable in frequency
		MULTI-CODE 105015		6 or 9	Original remote controls may be not stable in frequency
	310.000	Delta3 Moore-o-Matic: DT, DT2, DT2A, DT22A, DTC, DTD		9	Not supported yet!
		Delta 3 Moore-o-Matic: DT3, DT4		9	Not supported yet!
		Delta 3 Moore-o-Matic: Mini-T LB "LadyBug"		9	Not supported yet!
	312.000	Delta3 DTK (canada)			Not supported
MA SYSTEM	433.920	MA TX1, MA TX2, MA TX3		2
MARANTEC TECKENTRUP	418.000	D212, D222, D232		14
	433.920	D101		2
		D12		2
		D212, D222, D232		2
		Digital 302, D302		2
		Digital 304, D304		2
	868.300	Digital 302, D302		3
	868.300	Digital 304, D304		3
MCZ	433.920	Aster		2
MEIÃƒÅ¸NER MEISSNER	433.920	LW433-1, LW433-2, LW433-4		2
MEIÃƒÅ¸NER MEISSNER	433.920	Pocket 3750 1, 2, 4		2
MKTECHNO MK-TECHNO	306.000	MK-TECHNO TX1 and MKTECHNO TX2, with RED LED		8
MONSEIGNEUR	433.920	ARC2, ARC4		2
MONSEIGNEUR	433.920	TDR 400 3845, TDR 400 3846, TDR 400 3847 T1SAW433, T2SAW433, T4SAW433		2
MOTORLINE STATEUROP	433.920	MX1, MX2, MX3, MX4, MX6 MX11, MX12, MX13		2
MOTOSTAR	433.920	CLIKSTAR2, CLICKSTAR4 CLICK-4M, CLICKSTAR RE 532, CLICKSTAR RE 534		2
NICE	306.000	EASY S1, S2, S4		8	Original remote controls may be not stable in frequency
	433.920	FLO1, FLO2, FLO4		2
	433.920	VERY VE		2
NOLOGO	306.000			8	Original remote controls may be not stable in frequency
NOLOGO	433.920	ECO DIP		2
NOVOTECNICA	306.000	BIT N1, BIT N2		8	Original remote controls may be not stable in frequency
NOVOTECNICA	306.000	BIT NT1, BIT NT2, BIT NT4		2
OG	433.920	OG62, OG64		2
O&O OeO O and O	360.000	OeO TX2, OeO TX4 (green buttons)		8	Original remote controls may be not stable in frequency
	433.920	OeO TX2-E, OeO TX4-E (red buttons)		3
	433.920	T-COM DS 4-2, T-COM DS 4-4		2
OPENOUT	306.000	TS2M		8	Original remote controls may be not stable in frequency
OPENOUT	433.920	TMQ 433 2, TMQ 433 4		2
PIAZZETTA	433.920	4 buttons for wood/pellet heater		2
PORTAMATIC	433.920	MPH01, MPH02		2
POWERFIX Profi (Lidl)	433.920	RCB-A 3600R		2
PRASTEL	306.000	NCSMT1, NCSMT2P, NCSMT4P		8	Original remote controls may be not stable in frequency
	306.000	KMFT2P, KMFT4P, KMFT2P93, KMFT4P93		8	Original remote controls may be not stable in frequency
	433.920	MPSTF2E, MPSTF4E		2
PROEM	433.920	ER2C4ACM, ER4C4ACM		2
PROGET	433.920	ETY_433N2, ETY 433N4		2
PROGET	433.920	EMI433-N2		2
PROTECO	433.920	TX433		2
		EUROMATIC		2
		HIT		2
PUJOL	288.000	JCM TRINARIO 1, TRINARIO 2, TRINARIO 3		5	Original remote controls may be not stable in frequency
PUJOL	288.000	TT1, TT2, TRINARIO 1, TRINARIO 2		5	Original remote controls may be not stable in frequency
PULSAR	318.000	9931-318, 9931T-318			Not supported yet!
QUASAR	433.920	433 TANGO SLIM BLEU		2
QUICK	433.920	Model: 302		2
ROGER	433.920	R80/TX12, R80/TX14, R80/TX12R, R80/TX14R		2
		H80/TX22
		G80/TX32, G80/TX34, G80/TX32R, G80/TX34R
SEA	433.920			2
	433.920	SMART433_TX2, SMART433_TX3 SMART433_TX2_COPY,SMART433_TX3_COPY Smart2, Smart3		2
	868.350	231103, SEA868_4		3
		231103, Head2 Dip Switch		3
		SMART868-TX2, SMART868-TX3 Smart2, Smart3		3
SEAV	306/330	TX1, TX2, TX3, TX4, TX1/330 TX2/330, TX3/330, TX4/330		8	Original remote controls may be not stable in frequency
	433.920	TXS1, TXS2, TXS3, TXS4		2
		Behappy S1, Behappy S2, Behappy S3		2
		Be Easy TX, Be Easy Murale2		2
		BeSmart S2, BeSmart S4		2
		BeFree S1		2
	868.300	BeSmart H2, BeSmart H4		3
	868.300	BeFree H1		3
SECURVERA	433.920	SV R2C		2
		SV R2C		2
		SV R4C		2
		SV R6C		2
SENDER	433.920			2
SENTRY MARTIN ELECTRONICS	403.550	SENTRY binary, SENTRY trinary	s	13
SENTRY MARTIN ELECTRONICS	433.920	SENTRY binary		2
SERAI	310.000	OG/32		9	Original remote controls may be not stable in frequency
	433.920	OG/52, OG/54, OG/82, OG/84		2
		OG/28, OG/48, OG/62, OG/64		2
		OG/02, OG/04		2
SICE	433.920	TX4 CLACK Bigfoot			Not supported!
SILVELOX - INTRA	306.000	Green case with black buttons		8	Original remote controls may be not stable in frequency
SILVELOX - INTRA	433.920	Silvelox Intra HSM4		2
SIMBA	433.920	Simba RC1, Simba RC4		2
SIMINOR	433.920	ER2C4ACM, ER4C4ACM, ER2C4ACS, ER4C4ACS		2
SKYLINK	300.000 310.000	MultiLink SD300M, Skylink 100, LD310M, SD310M		6 or 9	Original remote controls may be not stable in frequency
	318.000	Skylink Mltilink PD-318M			Not supported yet!
	390.000	Multilink CB-390M, CD-390M (versions compatible with Chamberlain)			Not supported yet!
SMD	433.920	LW433-1, LW433-2, LW433-4 : AM models only		2
SOMFY	433.920	LEB TMW		2
STAGNOLI	433.920	ZEUS AZTR		2
STAGNOLI	868.350	ZEUS AZTR		3
STANLEY	310.000	24286		9	Original remote controls may be not stable in frequency
		1082		9	Original remote controls may be not stable in frequency
		1050		9	Original remote controls may be not stable in frequency
		1094		9	Original remote controls may be not stable in frequency
		1097		9	Original remote controls may be not stable in frequency
STARTEC	433.920	TXQ2		2
STINGER	300.000 310.000 318.000 390.000	300MCD21V, 300MCD22V 310MCD21V, 310LID21V, 310LID22V 318ALD31V 390LMD21V, 390LMPB1V	diff. colors		This is a compatible remote control: please look for the compatibility of the original retmotes!
Superior Electronics	433.920	Simple2, Simple4		2
TAU	315.000	250 TXA2, 250 TXA4		4	Original remote controls may be not stable in frequency
	433.920	250 SLIM, 250K-SLIM, 250K-SLIMC		2
		250TXD2, 250TXD4		2
		250BUG2, 250BUG4		2
		250T-4, 250T-4C		2
TEC KEY	300.000	MK1010		6	Original remote controls may be not stable in frequency
TECNOMATIC	433.920	TQ433		2
TEDSEN BERNER GFA Elektromaten	433.920	SKX1MD, SKX2MD, SKX3MD, SKX4MD		2
		SKX1KD, SKX2KD, SKX4KD, SKX6KD		2
		SKX1DL, SKX2DL, SKX3DL, SKX4DL		2
		SKX1LC, SKX2LC, SKX3LC, SKX4LC		2
		SKX1SL, SKX2SL, SKX3SL, SKX4SL		2
		SKJ		2
		SKX1WD, SKX2WD, SKX4WD, SKX11WD, SKX22WD, SKX44WD		2
TELCOMA	306.000	RCST2, RCST4		8	Original remote controls may be not stable in frequency
	433.920	TELCOMA EDGE 2, TELCOMA EDGE 4		2
		TELCOMA TANGO 2 SW, TANGO4 SW		2
		TANGO BLUE 2, TANGO 4 BLUE, TANGO BLEU 2, TANGO BLEU 4		2
		TANGO 2 N, TANGO 4 N		2
		TANGO 2 SLIM, TANGO 4 SLIM		2
		Telcoma Noire2, Noire4 Note: Rolling-code jumper should be removed from the receiver!		2
		TANGO WIN3		2
		TANGO2, TANGO4		2
TELEMATIC	300.000	TL1, TL2		6	Original remote controls may be not stable in frequency
TKC	433.920	TSAW433		2
TORAG	433.920	S429 1, S429 2, S429 4		2
TORMATIC DORMA NOVOFERM	433.920	HS, Dorma HS43 1E, HS43 2E, HS43 3E, HS43 4E		2
		MAHS, Siebau, Novoferm, Dorma		2
		MHS, MHS43-1		2
TREMA	433.920	TO93TV1, TO93TV2, TO93TV4		2
TUBAUTO	433.920	DIGITAL 101 433		2
V2	306.000	TRR1_306		8	Original remote controls may be not stable in frequency
	318.000	TPS1K		10	Original remote controls may be not stable in frequency
	433.920	V2 MATCH white, V2 MATCH black		2	This is a duplicator, so it is not possible to know exactly the transmitting code, but factory programmed code and almost any code supported by this duplicator is also supported by our transmitters
		PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P, TXC2 Contr.47, TXC4 Contr.47, Handy2 Contr.47, Handy4 Contr.47, TRC4 Contr.47, TSC4 Contr.47 . Note:the receiver should be programmed with the rolling code feature disabled.		2
		TCP3		2
		TCP3, ARC3		2
		TCP3		2
		TPR		2
		T1SAW/433, T2SAW/433, T4SAW/433		2
		TRR1, TRR2, TRR4		2
		PMR2, PMR4		2
	868.300	PHOENIX series: Phoenix2-868, Phoenix2P-868, Phoenix4-868, Phoenix4P-868. Note:the receiver should be programmed with the rolling code feature disabled.		3
VISONIC	315.000	WT100, WT100A, WT101, WT101A, WT102, WT104,WT-201, WT-201A, WT-201WP, WT-201AWP		4
	418.000	WT-100, WT-100A, WT-101, WT-101A, WT-102, WT-104,WT-201, WT-201A, WT-201WP, WT-201AWP		14
	433.920	WT 100, WT 100A, WT 101, WT 101A, WT 102, WT 104,WT 201, WT 201A, WT 201WP, WT 201AWP		2
VSEG	433.920	CR SLIM		2
WAINE-DALTON	433.920	S429-1, S429-2, S429-4, S429-mini		2
WAINE-DALTON	433.920	S425		2
WECLA CDS	433.920	433, 433_2		2
ZULLAN	315.000	250TXA1H, 250TXA2H, 250TXA4H		4	Original remote controls may be not stable in frequency
OEM	315.000			4	Original remote controls may be not stable in frequency

Cannot find your remote control in the Compatible table?
Please send a message by Telegram or Whatsapp to +393283730010 including remote control pictures, brand and model.

Additional information:

Original remote controls may be not stable in frequency: it means that the original remote controls has a transmitter circuitry which frequency may be NOT accurate. Because Sender and SenderBatt has a narrow bandwidth receiver, it can copy only remote control that are stable in frequency, like Creasol Multi, MultiST, Sender, SenderBatt.
Not supported yet!: it means that this kind of remote control cannot be copied now, but will be supported later.

Additional information for Creasol Sender programming/usage

Configure Sender to "car mode"

Push button 9 times, wait for led flashing (default 1 time), then push button 3 times.

Set frequency to 433.92MHz for CH1

Push button 1 time (channel 1), led goes ON.
Immediately push button 5 times (5=frequency), wait for led flashing (default 3 times=868.3MHz), then push button 2 times (=433.92MHz).

Learn remote control on CH1

Push button 1 time (channel 1), led goes ON.
Immediately push button 2 times (2=learn remote controls): led starts flashing slowly.
Push button on the remote control: you should see led emitting 2 quick flashes (code stored), 3 quick flashes (code already stored), or 4 quick flashes (code stored, but is a rolling code so it might not work).

Activating the needed channel using the high-beam level

if you connect Sender power supply to the high-beam lights (to the fuse or relay coil), you have to emit a number of short flashes corresponding to the channel number, plus one long flash (1 second or more)

##  ###########   transmit CH1
##  ##  #########  transmit CH2
##  ##  ##  ########## transmit CH3
##  ##  ##  ##  ########### transmit CH4

ChangeLog

2021-11-06

Added support for PRASTEL MPSTL2E, GIBIDI, DOITRAND TS2DE.

2021-10-04

SenderBatt BugFix: fixed hold-to-run mode. In previous versions, hold-to-run mode did not stop transmitting when input has been released, but it keeps transmitting for TIMEOUT seconds.