Pilns atbalsts: lielāko daļu produktu izstrādājam mēs!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

Pasūtījumi tiek nosūtīti 1 darba dienas laikā

Prioritārais pasts: ātri un lēti - Express kurjer

24 mēnešu garantija, ērta atgriešana/atmaksa

Pirms preču atgriešanas sazinieties ar mums!

Creasol DomBus31: 8 releju modulis mājas automatizācijas sistēmai ar ļoti mazu enerģijas patēriņu

Creasol DomBus31: 8 releju modulis mājas automatizācijas sistēmai ar ļoti mazu enerģijas patēriņu

1 Review(s) 

Creasol DomBus31 ir din-rail relay modulis, 115x90x40mm,ar 8 releju izvadiem. 6 releji ir SPST (Normally Open izejas) ar 250V 5A maksimālo spēju, un 2 releji ir SPDT (Normally Open un Normally Closed izejas) ar 10A spēju. To var savienot ar Domoticz kontrolieri, izmantojot RS485 sērijas kopni (4 vadi, 2 12 / 24V barošanas avotam un 2 datiem ar ātrumu 115200 b / s).Tāpat kā citas DomBus ierīces,DomBus31 nodrošina lielisku veiktspēju enerģijas optimizācijas ziņā: ja visi 8 releji ir aktīvi (sliktākajā gadījumā), enerģijas patēriņš ir tikai 500mW!Salīdzinājumam: KMTronic 8 releju modulis patērē 12 W, Denkovi 8 releju dēlis patērē apmēram 3 W, Sonoff Dual R2 patērē 2 W, ja ir iespējoti tikai 2 releji.Piemērots lietošanai kāDomoticz releju modulis: izmantojot vienkāršu 4 vadu ekranētu kabeli,

creDomBus31
Protocol: Modbus RTU (compatible with almost any system)
58,56 €
40,99 € - 30%
AR PVN Nosūtīts 1 darba dienas laikā

Apjoma atlaides

Daudzums Unit discount Cena Jūs ietaupat
1 30% 40,99 € 17,57 €
2 32% 39,82 € 37,48 €
3 34% 38,65 € 59,73 €
4 35% 38,06 € 81,98 €
6 36% 37,48 € 126,49 €
9 37% 36,89 € 195,00 €
Daudzums
Pieejams

  Pilns atbalsts: lielāko daļu produktu izstrādājam mēs!

Email: store@creasol.it - Telegram: CreasolTech - Whatsapp: +393283730010

  Pasūtījumi tiek nosūtīti 1 darba dienas laikā

Prioritārais pasts: ātri un lēti - Express kurjer

  24 mēnešu garantija, ērta atgriešana/atmaksa

Pirms preču atgriešanas sazinieties ar mums!

Creasol DomBus31 ir din-rail relay modulis, 115x90x40mm,ar 8 releju izvadiem. 6 releji ir SPST (Normally Open izejas) ar 250V 5A maksimālo spēju, un 2 releji ir SPDT (Normally Open un Normally Closed izejas) ar 10A spēju. To var savienot ar Domoticz kontrolieri, izmantojot RS485 sērijas kopni (4 vadi, 2 12 / 24V barošanas avotam un 2 datiem ar ātrumu 115200 b / s).

Tāpat kā citas DomBus ierīces,DomBus31 nodrošina lielisku veiktspēju enerģijas optimizācijas ziņā: ja visi 8 releji ir aktīvi (sliktākajā gadījumā), enerģijas patēriņš ir tikai 500mW!Salīdzinājumam: KMTronic 8 releju modulis patērē 12 W, Denkovi 8 releju dēlis patērē apmēram 3 W, Sonoff Dual R2 patērē 2 W, ja ir iespējoti tikai 2 releji.

Piemērots lietošanai kāDomoticz releju modulis: izmantojot vienkāršu 4 vadu ekranētu kabeli, tas ir iespējamspiegādājiet un savienojiet līdz pat 30 šādus moduļus, izmantojot RS485 ModBus protokolujau ir ieviests Domoticz (jāinstalē spraudnis):RS485 ir spēcīga sakaru sistēma, kuru ir vieglāk savienot nekā Ethernet, bez RF piesārņojuma, un kopnes kabelī jau ir iekļauta 12 / 24V barošana.

p>

Creasol DomBus31 8 relays module for domoticz home automation systemcreDomBus31 layout spēcīgs>

p>

Creasol DomBus 8 relay module for Domoticz home automation system

Domoticz relay board 8 relays

Iespējas

  • 6 releju izejas, SPST(parasti atvērts kontakts uz skrūves spaiļu bloka) ar250Vac / 30Vdc 5Akontakts (max 30Vdc līdzstrāvas slodzes gadījumā, 250Vac maiņstrāvas slodzes gadījumā).
  • 2 releja izejas, SPDT(parasti atvērti un parasti slēgti kontakti uz skrūves spaiļu bloka) ar250V 10Akontaktiem.
  • Releji ir sadalīti 3 blokos, katrs bloks ievēro šļūdes attālumu no citiem blokiem.Nejauciet augsta un zema sprieguma signālus vienā blokā!
  • 8-35Vdc barošanas avots (iekšēji regulē komutācijas režīma barošanas ķēde, kas samazina enerģijas patēriņu un izkliedi)
  • zems enerģijas patēriņš: 0,75 mA @ 12 V (9mW)stāvētstrāva ar visiem relejiem izslēgta, un 41mA @ 12V (500mW) arvisi releji ON.
  • 115200 bps RS485 autobuss (maksimālais garums: 1km).

div>

DomBus31 Ports iespējas

Noklusējuma adrese: 0xff31

Ostas Nr. Nosaukums Iespējas Noklusējuma konfigurācija Apraksts
1 OUT1 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST releja izeja, bez kontakta, 5A 250Vac vai 30Vdc izejas spēja. Releja kontaktu aizsargā varistors
2 OUT2 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST releja izeja, bez kontakta, 5A 250Vac vai 30Vdc izejas spēja. Releja kontaktu aizsargā varistors
3 OUT3 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST releja izeja, bez kontakta, 5A 250Vac vai 30Vdc izejas spēja. Releja kontaktu aizsargā varistors
4 OUT4 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST releja izeja, bez kontakta, 5A 250Vac vai 30Vdc izejas spēja. Releja kontaktu aizsargā varistors
5 OUT5 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST releja izeja, bez kontakta, 5A 250Vac vai 30Vdc izejas spēja. Releja kontaktu aizsargā varistors
6 OUT6 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPST releja izeja, bez kontakta, 5A 250Vac vai 30Vdc izejas spēja.Releja kontaktu aizsargā varistors
7 OUT7 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND OUT_RELAY_LP SPDT releja izeja, NO + NC kontakti, 10A 250Vac vai 250Vdc izejas spēja. Releja kontaktu aizsargā varistors
8 OUT8 OUT_DIGITAL, OUT_RELAY_LP, OUT_BLIND(1) OUT_RELAY_LP SPDT releja izeja, NO + NC kontakti, 10A 250Vac vai 250Vdc izejas spēja. Releja kontaktu aizsargā varistors

(1): var izmantot kā BLIND izeju, lai atvērtu žalūziju / aizkaru, bet tikai iepriekšējo portu var konfigurēt Domoticz kā OUT_BLIND, jo, konfigurējot kā OUT_BLIND, DomBus ierīce automātiski konfigurē nākamo portu, lai vadītu releju atvērtā stāvoklī virzienu.

Lietošanas piezīmes

Apkures / ventilācijas sistēma

Turpmākās vienkāršās diagrammas attēlo savienojumu ar siltumsūkni (ko vada zemsprieguma signāli), ventilācijas sistēmu (kontrolē zema sprieguma signāli) un 3-vias vārstu (piegādā 230Vac).

Izmantojot Domoticz, ir viegli iegūt apkures / dzesēšanas sistēmu ar siltumsūkni, kas optimizēta, lai patērētu lielāko daļu enerģijas no fotoelementiem, un ar atjaunojamu gaisa vadāmu mehānisko ventilāciju ar dzesētāju un spirāli, kas regulē relatīvo mitrumu, lai iegūtu maksimālu komfortu.

Drošības apsvērumu dēļ nejauciet augsta un zema sprieguma slodzes vienā blokā! Piemēram, tas nav drošiBlokā 3 pievienojiet 230 V vārstu RL8 un 12/24 V vārstu RL7! Uz katra releja bloka ir iespējams izmantot tikai zema sprieguma vai tikai augstsprieguma slodzes.

Controlling heat pump and ventilation by Domoticz + Creasol DomBus31 relay module

ADSL maršrutētājs, kuru kontrolē Domoticz skripts, lai novērstu bloķēšanu

Šī shēma parāda, kā izmantot parasti slēgtu SPDT releja kontaktu, lai piegādātu maršrutētāju.
Skripts pārbaudīs, vai internets darbojas, un neveiksmes gadījumā aktivizējiet atiestatīšanu, lai izslēgtu strāvas padevi 10 sekundes, atiestatot maršrutētāju.

Supply a ADSL router by Domoticz + DomBus31 to prevent internet hang-up

VAIRĀK INFORMĀCIJAS31. https://www.creasol.it/CreasolDomBus




Smart-Home Creasol DomBus modules for Domoticz, Home Assistant, Node-RED, OpenHAB, ...

The following video shows a presentation of some domotic modules designed and produced in Italy by Creasol to make a reliable, easy and power-optimized home automation system.


The next video shows our Smart EVSE module that can be used to charge the electric car by using only solar power, or adding 25/50/75/100% of available power from the electrical grid.

Our industrial and home automation modules are designed to be

  • very low power (around 10mW with relays OFF)
  • reliable (no disconnections)
  • bus connected (no radiofrequency interference, no battery to replace).

Modules are available in two version:

  1. with DomBus proprietary protocol, working with Domoticz only
  2. with Modbus standard protocol, working with Home Assistant, OpenHAB, Node-RED
Home automation system using DomBus modules

Store website - Information website

For our products we can offer FULL SUPPORT and CUSTOMIZATION: please contact us by Email or Telegram

DomBusEVSE - EVSE module to build a Smart Wallbox / EV charging station

DomBusEVSE smart EVSE module to make a Smart Wallbox EV Charging station Complete solution to make a Smart EVSE, charging the electric vehicle using only energy from renewable source (photovoltaic, wind, ...), or adding 25-50-75-100% of available power from the grid.

  • Single-phase and three-phases, up to 36A (8kW or 22kW)
  • Needs external contactor, RCCB (protection) and EV cable
  • Optional power meter to measure charging power, energy, voltage and power factor
  • Optional power meter to measure the power usage from the grid (not needed if already exists)
  • Two max grid power thresholds can be programmed: for example, in Italy who have 6kW contractual power can drain from the grid Max (6* 1.27)=7.6kW for max 90 minutes followed by (6* 1.1)=6.6kW for another 90 minutes. The module can use ALL available power when programmed to charge at 100%.
  • Works without the domotic controller (stand-alone mode), and can also work with charging current set by the domotic controller (managed mode)

DomBusTH - Compact board to be placed on a blank cover, with temperature and humidity sensor and RGW LEDs

DomBusTH domotic board with temperature and humidity sensor, 3 LEDs, 6 I/O Compact board, 32x17mm, to be installed on blank cover with a 4mm hole in the middle, to exchange air for the relative humidity sensor. It can be installed in every room to monitor temperature and humidity, check alarm sensors, control blind motor UP/DOWN, send notifications (using red and green leds) and activate white led in case of power outage.

Includes:

  • temperature and relative humidity sensor
  • red, green and white LEDs
  • 4 I/Os configurable as analog or digital inputs, pushbuttons, counters (water, gas, S0 energy, ...), NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays; they can also be configured as analog/digital inputs, pushbuttons and distance sensors.

DomBus12 - Compact domotic module with 9 I/Os

DomBus12 domotic module with 9 I/O Very compact, versatile and cost-effective module with 9 ports. Each port can be configured by software as:

  • analog/digital inputs
  • pushbutton and UP/DOWN pushbutton
  • counters (water, gas, S0 energy, ...)
  • NTC temperature and ultrasonic distance sensors
  • 2 ports are configured by default as open-drain output and can drive up to 200mA led strip (with dimming function) or can be connected to the external module DomRelay2 to control 2 relays.

DomBus21 - Power optimized module with 3 High Power latching relays, 1 AC input and 4 low voltage inputs

DomBus21 module with 3 high power latching relays Very low power consumption module designed to enable up to 3 high power loads, up to 15A (3kW).

  • 3x high power latching relays SPST 15A: latching relay consumes nothing when ON
  • 1x 230V AC opto-isolated input used as power outage detector, and also as zero-crossing detector to permit switching relays On/Off minimizing in-rush current (for capacitive loads) and overvoltage (for inductive loads)
  • 4x low voltage inputs, that can be connected to pushbuttons, switches, meters with pulsed output, NTC temperature sensors, ...

DomBus23 - Domotic module with many functions

DomBus23 domotic module with many functions Versatile module designed to control gate or garage door.

  • 2x relays SPST 5A
  • 1x 10A 30V mosfet (led stripe dimming)
  • 2x 0-10V analog output: each one can be configured as open-drain output to control external relay
  • 2x I/O lines, configurable as analog/digital inputs, temperature/distance sensor, counter, ...
  • 2x low voltage AC/DC opto-isolated inputs, 9-40V
  • 1x 230V AC opto-isolated input

DomBus31 - Domotic module with 8 relays

DomBus31 domotic module with 8 relay outputs DIN rail low profile module, with 8 relays and very low power consumption:

  • 6x relays SPST 5A
  • 2x relays STDT 10A
  • Only 10mW power consumption with all relays OFF
  • Only 500mW power consumption with all 8 relays ON !!

DomBus32 - Domotic module with 3 relays

DomBus32 domotic module with 3 relay outputs Versatile module with 230V inputs and outputs, and 5 low voltage I/Os.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

DomBus33 - Module to domotize a light system using step relays

DomBus33 domotic module with 3 relay outputs that can control 3 lights Module designed to control 3 lights already existing and actually controlled by 230V pushbuttons and step-by-step relays. In this way each light can be activated by existing pushbuttons, and by the domotic controller.

  • 3x relays SPST 5A
  • 3x 115/230Vac optoisolated inputs
  • Single common for relays and AC inputs
  • 5x general purpose I/O, each one configurable as analog/digital inputs, pushbutton, counter, temperature and distance sensor.

Each relay can toggle the existing step-relay, switching the light On/Off. The optoisolator monitors the light status. The 5 I/Os can be connected to pushbuttons to activate or deactivate one or all lights.

DomBus36 - Domotic module with 12 relays

DomBus36 domotic module with 12 relay outputs DIN rail module, low profile, with 12 relays outputs and very low power consumption.

  • 12x relays SPST 5A
  • Relays are grouped in 3 blocks, with a single common per block, for easier wiring
  • Only 12mW power consumption with all relays OFF
  • Only 750mW power consumption with all 12 relays ON !!

DomBus37 - 12 inputs, 3 115/230Vac inputs, 3 relay outputs

DomBus37 domotic module with 12 inputs, 3 AC inputs, 3 relay outputs Module designed to be connected to alarm sensors (magnetc contact sensors, PIRs, tampers): it's able to monitor mains power supply (power outage / blackout) and also have 3 relays outputs.

  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)
  • 3x 115/230Vac optoisolated inputs
  • 2x relays SPST 5A
  • 1x relay SPST 10A

DomBus38 - 4 SPDT 10A relays, 2 SPST 10A relays, 1 AC input, 12 low voltage inputs

DomBus38 domotic module with 12 inputs, 1 AC input, 6 relay outputs DIN rail module designed for burglar alarm system.

  • 4x relays SPDT (normally open + close contacts), 10A
  • 2x relays SPST 10A
  • 1x 115/230Vac optoisolated inputs, that can be used to monitor 230V voltage presence (blackout detector) and it's also used as zero-crossing detector to minimize in-rush current and overvoltage when a relay switches On/Off
  • 12x low voltage inputs (analog/digital inputs, buttons, alarm sensors, balanced double/triple biased alarm sensors, counters, temperature and distance sensors, ...)

DomBusTracker - Smart dual-axis sun tracker to optimize photovoltaic production

DomBusTracker domotic module that controls a dual-axis solar tracker motors DIN rail module that control azimuth + elevation/tilt motors of a sun tracker, to maximize photovoltaic energy production during the day and seasons.

  • Uses a deep-hole sun sensor, to optimize production with both sunny and cloudy weather
  • Works in stand-alone mode (no need for external controller)
  • Can be connected to Domoticz for monitoring and controlling the motors position

DomRelay2 - 2x relays board

Relay board with 2 relays, to be used with DomBus domotic modules Simple module with 2 relays, to be used with DomBus modules or other electronic boards with open-collector or open-drain outputs

  • 2x 5A 12V SPST relays (Normally Open contact)
  • Overvoltage protection (for inductive loads, like motors)
  • Overcurrent protection (for capacitive laods, like AC/DC power supply, LED bulbs, ...)

DomESP1 / DomESP2 - Board with relays and more for ESP8266 NodeMCU WiFi module

Relay board for ESP8266 NodeMCU module IoT board designed for NodeMCU v3 board using ESP8266 WiFi microcontroller

  • 9-24V input voltage, with high efficiency DC/DC regulator with 5V output
  • 4x SPST relays 5V with overvoltage protection
  • 1x SSR output (max 40V output)
  • 2x mosfet output (max 30V, 10A) for LED dimming or other DC loads
  • 1x I²C interface for sensors, extended I/Os and more)
  • 1x OneWire interface (DS18B20 or other 1wire sensors/devices)

creDomBus31

Reviews

Write your review

Creasol DomBus31: 8 releju modulis mājas automatizācijas sistēmai ar ļoti mazu enerģijas patēriņu

Creasol DomBus31 ir din-rail relay modulis, 115x90x40mm,ar 8 releju izvadiem. 6 releji ir SPST (Normally Open izejas) ar 250V 5A maksimālo spēju, un 2 releji ir SPDT (Normally Open un Normally Closed izejas) ar 10A spēju. To var savienot ar Domoticz kontrolieri, izmantojot RS485 sērijas kopni (4 vadi, 2 12 / 24V barošanas avotam un 2 datiem ar ātrumu 115200 b / s).Tāpat kā citas DomBus ierīces,DomBus31 nodrošina lielisku veiktspēju enerģijas optimizācijas ziņā: ja visi 8 releji ir aktīvi (sliktākajā gadījumā), enerģijas patēriņš ir tikai 500mW!Salīdzinājumam: KMTronic 8 releju modulis patērē 12 W, Denkovi 8 releju dēlis patērē apmēram 3 W, Sonoff Dual R2 patērē 2 W, ja ir iespējoti tikai 2 releji.Piemērots lietošanai kāDomoticz releju modulis: izmantojot vienkāršu 4 vadu ekranētu kabeli,

Write your review

Jums arī varētu patikt

Klienti, kuri iegādājās šo preci nopirka arī:

Creasol DomBus31: 8 releju...

58,56 € 40,99 €